How do I turn up volumn on the wd-65735 model without remote. it only goes up to 63 and my remote is broken so I need intructions on how to do it manually.

bad lamp

error 1,2 is no error found---if you unplugged the set it will clear another error and you will get 1,2 error.

If the set has another issue turn it on and let it fail, then do the self check again.

Replace the medieval TV.

Green light blinking is set trying to boot up, no boot and of course set will not turn on, boot should take seventy seconds or so from plug in, if it does not stop blinking that is called the blinking light of death, as so many had this problem, probable going to have to replace the chassis if it is original one and that is usually five hundred plus parts and labor, just Google the model number with problems to see what I mean.

Look first to see if a DVD etc connected by itself to a rear input on the set gives you normal sound or not--this will rule some possible things out.

Contact Mitsubishi Directly for a part number (set has two screens at least) to see if it is available and at what cost.

With the set off the timer light should not blink constantly.

If power is disconnected and then put back it should blink for about 70 seconds and go off (this is set booting up like a computer) and then set should be able to be turned on.

If that like blinks constantly something in the microprocessor is causing it.

This set MAY have the soft reset that was used in a lot of these models:

With Mitsubishi remote turn set on and hit menu, 1, 2, 3, enter.

Ya on remote press the input button then pick the appropiate source such as ant1 or DVR

hello,
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Power supply board just die.It can be dead at anytimes.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Good luck..

A quick search of google reveals that the manual is downloadable from here:

http://www.wigix.com/index.php/item/detail/1330409/Mitsubishi-DLP-Rear-Projection-TV---65-WD-65735#item_detail_view_upload_manual_tab

Hope this helps!