Question about Euro-Pro Shark GI490 Iron

2 Answers

Hey there, Please guide me for the wire connections for Shark GI490 Iron along with the color code so that it can work back again. I will appreciate you assistance.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

The advice given here is totally incorrect. Please ignore Azraelsrl solution. Being incorrect makes it very dangerous!!!
Blue or black = Neutral red or brown = phase green or green/yellow = earth.
If in doubt, you should get a qualified electrician to replace the cord to your iron. Getting it wrong... can easily kill someone!!!
regards robotek

Posted on Apr 13, 2010

  • Azrael SRL Dec 24, 2010

    Actually as long as the grounding wire (the yellow/green) is correctly identified there is no danger whatsoever in switching the faze and null wires. If it would been otherwise you would be in mortal danger every time you would plug it in the mains.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

The wires from the power cord ? If yes then: blue = faze, brown = neutral, yellow and green = ground.

Posted on Dec 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DISASSEMBLE SHARK G1465D ELECTRIC IRON


there are 4 screws that you can see and two more under the large rubber stand off at the bottom. I also need you post the wire in the back because I took mine apart and now don't remember the position of the wires

Jan 23, 2012 | Euro-Pro Shark GI490 Iron

1 Answer

It suddenly quits...i have to juggle the line cord to have a power.


Sounds like a loose connection from the screws inside the housing of the iron. It is a wee bit of a bugger to get INTO this iron, but with a little patience, and a screwdriver (phillips, the + one) you should be able to get to where the power cord connects to the terminals inside the iron. Loosen, and retighten the connection. If the wire seems 'worn', you may have to cut it back a bit and score off some of the plastic, and re-wire.

Mar 17, 2010 | Euro-Pro Shark GI490 Iron

1 Answer

Can't get the Iron to come on. power light is on.


sensor is not working properly please check and replace the unit

May 21, 2009 | Euro-Pro Shark GI490 Iron

1 Answer

Shark GI495N cord sparked and burst into flame


shark website for instructions and number

May 07, 2009 | Euro-Pro Shark GI490 Iron

1 Answer

SHARK STEAM STATION G6200 SUDDENLY STOPPED WORKING.


take it back to the store and tell them what has happend the only thing i can think of is that one of the wires has come loose within the cable

Apr 21, 2009 | Euro-Pro Shark GI490 Iron

2 Answers

SHARK IRON WITH TANK.GREAT BUT SUDDENLY STOPPED.


these along with coffeemakers have a thermal fuse for safety the fuse looks like a cilinder with one flat side and the other side pointed with a wire protruding on both sides. it is located inline with the heating element under the cover "Appliance Parts" on the internet sells the part

Apr 21, 2009 | Euro-Pro Shark GI490 Iron

1 Answer

Shark G1490 doesn't light up or heat up when I plug it in.


circuit board has shorted out that control iron functions or power wire lead has broke off inside of iron

Jan 12, 2009 | Euro-Pro Shark GI490 Iron

2 Answers

Shark Euro Pro Iron turns of while ironing


what makes the water spit out of the iron and make my clothes wet

May 05, 2008 | Euro-Pro Shark GI490 Iron

Not finding what you are looking for?
Euro-Pro Shark GI490 Iron Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Irons Experts

Brad Brown

Level 3 Expert

18108 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you an Euro-Pro Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...