I ALREADY PAIRED THE MAD CATZ BLUETOOTH WITH MY PS3 AND TESTED THE AUDIO, WORK, FINE. BUT WHEN I PLAY GAME (UNREAL TOURNAMENT III ) AND TALK INTO THE BLUETOOTH I CANNOT HEAR MYSELF TALKING IN THE GAME WITH THE OTHER PLAYERS. I CANNOT HEAR THE OTHER PLAYERS THROUGH THE BLUETOOTH EITHER.

Ah, very simple.
Turn on your bluetooth headset Go to wireless headset, press triangle for options choose connect, then press circle after. You've already got it done.
That's all I did and it works just fine, happy gaming!

change out put to your head set not default

There may be a mute switch.However Mad Catz is not licensed by Sony.The package probably read licensed by Mad Catz which means absolutely nothing.You need Sony brand or one that says licensed by Sony.Off brands almost always cause problems.I used to work on game systems professionally.Good luck and game on!

Mad catz is not officially licensed by Sony.Please feel free to check out my tips as I have typed this about a thousand times.Good luck and Game On!

The headset wouldn't connect so we deleted it. Then went back and tried to pair it again. And it wont flash blue and red, just blue.

Let's see if we can FixYa!

You may want to review this guide for connecting a bluetooth headset to a PS3:
(Click here)
http://boardsus.playstation.com/playstation/board/message?message.uid=26900460

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!!

Let's see if we can FixYa!!

You may want to review this guide for connecting a bluetooth headset to a PS3:
(Click here)
http://boardsus.playstation.com/playstation/board/message?message.uid=26900460

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!!

Hello,

A Bluetooth headset has to be registered, or "paired", with your PS3 before it can be used.

• Make sure your Bluetooth headset is fully charged before you begin.
• Check your headset instructions for entering "pairing mode". Activate your headsets' "pairing mode" so it can be recognized by the PS3.
• On the Cross Media Bar (or XMB) of the PS3 go to the "Settings" tab, then down into "Accessory Settings", then down into "Manage Bluetooth Devices".
• With your headset in pairing mode, follow the onscreen instructions and let the PS3 scan for your headset. When your headset is found, follow the prompts and enter a pass key (if necessary- the default is usually 0000 for all brands). The pairing should now be complete.

Hope this helped.

Try entering six zero's if that does not work try four zero's

like my headset was fully charged and i got grounded then it wouldnt work when i got my ps3 back if you have had the same problem shoot me a email at [email protected] if you have fixed it tell me out