- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's not in the manual for the good reason that the AT&T 992 isn't an answering machine. If you want to record an outgoing voicemail greeting, you'll have to do it on the voicemail system, not on the phone.
The AT&T 992 isn't an answering machine. If you want to know how to record an outgoing voicemail greeting, you'll have to tell us the make and model of the voicemail system.
Hi, You will need to remove the old message. There SHOULD be prompts. IF NOT try going to a very quiet room and hit record but do not say or make noise and this will record silence over the old and new message. Then attempt to retry. ALSO - look for a 'reset' button and remove all batteries if you have power outage back up batteries. Unplug the phone - and try again. Here are the instructions from the manual: To Change Your Personal Greeting:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. Press the ADMIN softkey
4. Press the GREET softkey
5. Press the REC softkey
6. Press the PRIME softkey
7. Press the YES softkey
8. At the tone, record your new greeting, press the OK softkey
to end your recording and then the OK softkey again to accept the new
recording
Which model phone do you have? For the CL82509 and related DECT 6.0, you need to set the outgoing message from the handset when the answering machine is on. (It can be turned on from the handset).
For the outgoing message: with the handset in Idle mode, press Menu/Select. Use the up (Dir) and down (CID) arrows to highlight Ans Sys Setup. Then press Menu/Select. Use the same arrow keys to select Announcement and press Menu/Select again. Press 7 to record a new announcement. At the tone, speak your message clearly then press 5 when you have ended the message. The message will play back.
You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
To Create Your Personal Greeting: 1. Press the Check Voicemail key or press the Feature button, then 981 2. Enter your password 3. Press the ADMIN softkey 4. Press the GREET softkey 5. Press the REC softkey 6. Press the PRIME softkey 7. Press the YES softkey 8. At the tone, record your new greeting, press the OK softkey to end your recording and then the OK softkey again to accept the new recording
Please let us know if that was helpful enough.
Good Luck & Thanks
Shiv.
Recording your greeting message You can record your own greeting message (max. 2 minutes and 30 seconds). If you do not record a greeting message, a prerecorded greeting message is used. 1 {MENU} 2 {V}/{^}: “Answering device” i {OK} 3 {V}/{^}: “Record greeting” i {OK} 4 After the handset beeps, speak clearly about 20 cm (8 inches) away from the microphone. 5 To stop recording, press {OK}. 6 {OFF}
If this helps you solve it, plz rate this fixya. Thank you kindly.
×