I am having problems with an extra monitor

Its probably not stuck-it looks like extra small is the only font available for 1/4 inch tape. I put 1/2 inch tape in and was able to access the other fonts. If you print out the 1/4 inch with extra small font there is hardly any clear border space

its a manufacturing default and ask for replacement from samsung incase its in warranty or buy a new one Dell monitors are the best

Dear User,
Good Day!
Please use the auto button in you monitor then it will automatically adjust the resolution of your screen. Please feedback us what happen.
Thank you...

most like you are not using the native format of the resolution of the screen, it will adjust and not use the whole dimension.

check the manual and then the settings on the computer

Hubby spoke to the guys at Best Buy and learned that this was normal as there is no HD reception here.
Thanks for your interest
P

enter your bios settings at startup (push del, F2 or F10) and set the vga output to stretched.

Once you change the resolution to a smaller size and you see the black border, go into the monitor's menu and there should be settings for the Horizontal and Vertical size/position. Adjust those until it looks correct.

I hope this helps :)

Best Regards,

James

All LCD displays have an "Auto" button press it and see if that fixs it. should be aparent what it does if it does it. but basicly it alines the picture with the screen. when you change back to user profile you may need to press it again.

Common problem.
There are 8 small VRAM BGA chips.
1 or 2 of them needs REFLOW.
Basically board service.

if you hav a monitor separate from your computer(not a laptop)then just use your settings on the monitor untill it works again the way you like it..

or for laptops and monitors with no controls on them go 2 control panel>>>>appearance and themes>>>>display. then click on the tab that says settings. go 2 advanced and the dpi setting should be set at 96....and if nothing changes go 2 the appearance tab then 2 advanced. and at the bottom for the item look for active window border and the size should say 1. if it does then keepo trying to make the number bigger so your page doesnt have a black border