Don't acept cartrige of ink. Allthe time the

you will see there is a fuse on the cartridge. replace it with a new one. it can be biger becouse you will remove it again.
put the cartrige back with other fuse and close door for 3 secons. take cartridge out and remove the fuse.
put cartrige back with out the fuse. it sould work.

the other way is to push setup and then # 1934.
push setup again check for new cartrige or egnore cartrige.
swich m/c off and on.

An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart C5380 All-in-One Printer - HP Customer Care (United States - English).


If you need more help post back!
Thumbs and testimonial are welcome!

Your printer head may be closed.To remove the problem jast open ink cartrige from the cartrige chamber. set a seringe with full of black ink into the plustic pin which are tidely insert in the ink cartrige. After push 2/3 time your printer work fine again.
Thank You .
Shohagtush

1- press MENU #1934 and it show you "TECH"
2- Press MENU, Acept. and it show you "Tech Mode"
3- Press < once. and it show you "NEW CARTRIDGE"
4- Press Acept. [YES].
5- Press Acept
6- Press MENU #1934 to exit "TECH MODE"

Note: Don't wait when press #1934. Do this quick.

Make the the cartridge is seated properly and the contacts are not dirty or soiled form touching them.You can remove the cartridge and clean the contacts with isopropyl alcohol gently and ley dry.

Remove all paper...(inspect closely for paper jammed way inside!)

also remove both ink cartriges, reinsert them one at a time carefully and properly....also double check the number code on the ink

the jam error could be either paper or cartriges confusing the printer. let me know if it works....k

OK this issue needs to be resolved in a different manner take all the ink cartriges and after they are removed unplug the power cable from the back of the printer and after that press and hold the # and 6 button at the same time ,while holding it plug in the power cable back in the printer then as it turns back on release the buttons the printer will perform a reset within itself ,it is called a semi-full reset after it is done insert the cartridges back into the printer it will align the cartridges after that the issue should be resolved if not then there is some problem in the ink cartriges and replace them still if it does not work notify me and do let me know this issue gets resolved or not.....

Hi

You are having a hardware issue with the product, the sensor for the printhead is damage that's why you are getting general error. call epson for support so that they can give you a discount for a new product, hope this helps..

i have canon mx300 printer.I refill second time color cartrige and when I push him back apears this mesage " CHECK INK" cod U051. I tried to reset mai Canon like alfr3do and the same mesage. You could help me?
Thank you!

remove the cartridge and see if it goes away, if does then you probably have a defective cartridge are are not inserting it correctly.

Thank You,


Mikey