Will my ifit treadmill card work in an incline

http://electro-medical.blogspot.com/

Is it trying pair up the bluetooth? Ie to your phone or other device.

Do you have the iFit component on your treadmill? We had a similar issue and I unplugged the iFit component (requires opening the console and unplugging the ribbon cable that attaches the iFit component) and the treadmill started working again.

Check this link out, there's some useful information that could solve your problem if you're still dealing with this loop.
best of luck!

https://thatguyreviews.com/treadmill-display-rebooting-ifit/

Sounds like a software issue. Call nordictrack at 888-308-9616

please see the video and fix it. God bless you

Wow, lots of scary posts. If I had read this before, I would never have bought it. :)

Anyways, there is a solution. I dont think this post was ever resolved, so I ran across this site that offered a few steps that allowed me to fix the reboot issue and a few nice folks who would reply to any questions.

This sounds like a common problem with ifit on treadmills. I came across this site a few weeks back and it helped! There's a few folks there that could offer suggestions too. best of luck!

https://thatguyreviews.com/treadmill-display-rebooting-ifit/

Hope this helps!

Disconnect wifi and boot machine. This works well for a non-internet workout. I had a similar problem--endless looping of the boot up routine--which ultimately fixed itself when I tried updating. I believe they came out with a new update which must have fixed some bug in the system.

try to RUN the software calibration, see your instr. manual how to enter and proceed for easy diagnose, troubleshooting, and fix it.
God bless you

The Trainer is reading; Serching for motor controler