OKI B2540 MFP .... Just in the process of setting it up. I have one problem: I have one telepone line that rings once for most incoming calls but for faxing purposes I have a second number on the same line that has a double ring to it. How do I get the B2540 to only answer the fax machine on the double ring? If the incoming call only has the standard, single ring, I do not want the fax machine to pick up.

Good morning my printer okidata B2540 mfp not work anymore because the scanner installed on my notebook windows 7, it prints, but lost all other functions. so ask for help. Att WGS

You cannot clear the fax memory as its integral with the main memory. The only way to do it would be to wipe the whole printer of its memory and start again. Its not worth it. Just let it print them!

Hi,
You can go here
http://www.oki.co.uk/support/printer-drivers/index.aspx

Go here


http://www.oki.co.uk/support/printer-drivers/index.aspx

I know this may seem like an obvious solution, but have you read the manuel? If it's no longer in your possesion, you can download it directly from here:

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Alternatively, here's a link which shows you how to do it:

http://my.okidata.com/oki-faq.nsf/FAQCentral/18FE0A954455318585257656004A3BE4?OpenDocument

Hope this helps. If so, please rate. Thanks.

replace main board...thats what i had to do...

Press the START button while it is ringing. Scroll through the menus and set your machine to AUTO RECEIVE.

For a phone line dedicated only to the fax machine, the process is as follows:

1. Press Menu/Set, 0, 1.
2. You will see the Fax Receive window
3. Use UP and DOWN arrows to change the setting to FAX ONLY
4. Press Menu/Set.
5. Press STOP/EXIT

Your fax machine will now answer every incoming call.
If the fax machine is sharing the phone line with a telephone, repeat the above steps and change from FAX ONLY to FAX/TEL This option will allow you to share the line with a phone only, not an answering machine. Once in FAX/TEL mode, the fax machine will still grab every incoming FAX call, and give a special ring (slightly different than a regular telephone ring) when it's a regular incoming phone call signaling you to answer the phone. I hope this helps with your problem. Best of luck!
Greg

OKI B2540 MFP IS GETTING A FUSER TEMP ERROR, DO YOU KNOW HOW TO FIX

You can get the printer drivers from the link below:

http://my.okidata.com/pp-B2540MFP.nsf/openingdrivermenu?OpenFrameSet