What password code does the polaroid pogo printer need to sync i have tried most common ones but no good

Unless you changed the default passkey it should be the default of 6000 some also use 0000.

I had trouble finding one for my PoGo printer and finally found these people by calling Polaroid and being re-directed here. They may have adapters for the PoGo Camera also. The number is 1-800-765-2764 and listen for options.

Hope it helps and let us know if it works for you.

6000 is the standard password

You can download the manual from http://www.polaroid.com/media/document/PolaroidPoGoInstantMobilePrintermanual20090624.pdf

is that polaroid pogo printer??????

If yes then password is 6000

I presume you are trying to connect via Bluetooth. Your device (Mobile phone or Laptop will ask you for a Security code to connect to the PoGo. You have to enter the Passcode on the device.

Try Polaroide Passcode 6-0-0-0 when you connect.

This should work. First check your Notebook to see if it is BlueTooth enabled. If not don't worry you'll need to buy a USB Dongle. (about $8.00 street value Check eBay.)
Go to Control Panel >BlueTooth run the wizard. Enter code 6000 the code to recognize your Pogo. Normally the Pogo will accept a jpeg
from your camera. If you intend to manipulate your jpeg in any way say with Photoshop - I mean crop or enhance - sharpen, hue, saturation changes you might not have any success. There seems to be very little technical info for the Pogo printer. Very poor of Polaroid such a well respected name.
Colin

6-0-0-0 (according to Polaroid Pogo US manual)

The PoGo can connect to a PC with Bluetooth only. Once you establish a Bluetooth connection with your PC, simply copy any JPEG file to the PoGo using Explorer. No printer driver is needed, just copy the file to the PoGo over the Bluetooth connection.
If your PC doesn't have Bluetooth, you can buy a USB Bluetooth dongle for $5-$20.