My kool space wine cellar is not holding temperature

PRESS AND HOLD THE SET BUTTON WHILE YOU CHANGE THE SET COOL POINT UP OR DOWN

That will always depend on the Manufacture of your Koolspace Wine Cooler. If Koolspace keeps record's they will ask you for your serial number. It does appear you have an eliete model and brand name so I would think they are well ahead of the game.

Fax: 403-283-6111

Calgary Phone: (403) 283-7575
Toll-Free: (877) 283-7575

Design/Construction Inquiry: Click Here
Wine Cellar Services Inquiry: Click Here
Accounting Inquiry: Click Here
Cellar Coordinator Inquiry: Click Here
Gallery
If you have warranty issues with your cooling unit (ChillR or Vintage Keeper Nuvo), please contact the manufacturer directly at www.wineracking.com or 1-888-274-8813
We have set up our Calgary space to introduce you to the most stylish and sensible storage and lifestyle accessories for the discerning wine-enthusiast.
Please feel free to drop by our showroom at any time during regular business hours. If you prefer we can arrange practically any time that is convenient for you.
10:00 am - 5:00 pm : Mon - Fri
Saturdays by appointment only
If this was a Whirlpool question I could find it myself with model and serial If helpful please rate this solution, Thank You, Sea Beeze

you want the same model? if so, [email protected]

I have never heard of a wine cabinet getting below that range? Has this unit every reach temps that low before? I would make sure the unit is breathing, check the condenser and air flow through the unit. If the unit is not choking, and temps can go below 65, than yes you will need to have it serviced. It can be a thermostat issue.
Good Luck

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

did you clean the coils on it?

How long have you had this unit and did it quit suddenly or did it fail intermittently. Do you mean running where you can hear the fan and the light comes on when you open the wine cellar door? If so, I would suspect the starting relay failure on your cooler which should be very easy to replace. There should be a wiring diragram on the back of your unit somewhere and could be labeled (RT). Your compressor would be the last thing I would suspect.

check to see if compressor cycles, if so you may have a thermistor problem which is intergrated with control, replace if you can find part. make sure to check evaporator, see if ice is forming if so you have a leak,or dry evap. you have a leak. repar.
hope this helps.

You'll need to replace the fan. The original fan bearings wear our after a couple of years. It's pretty simple to drill out the rivets and replace the fan. I suggest you replace all four with ball-bearing fan units.

I have the Vintage Keeper Odyssey. I had the same thing the other day. Unit is 7 years old. Vintage Keeper web-site suggested to unscrew the control box and remove. (The box with the "Set" and Up and Down arrows. Unplug the wiring and sensor on the back and then plug back in. Plug in the unit and text. It took my "AL" away.

Unit doesn't cool very well. A coolant leak may be my problem. I was looking for solutions other than buying a new refrigeration unit.