How to reset lamp counter in Sony-VPL-ES3 - Sony VPL-ES3 Multimedia Projector

Check the lamp first

We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

Go into the menu and reset the lamp timer.

Press and hold menu switch for 10 seconds at on position key will unlock

Hi there. To Service Mode in SONY VPL-ES3 is, ENTER-ENTER-LEFT-ENTER. watch out!!!, Don't change anything if You don't know what are You doing.

hi have vpl-es3 i changed the lamp but i have massege replace the lamp

According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:

RESET
Left Arror
Right Arrow
ENTER

The above sequence should clear the counter.

Dan

Hello,

• Set the projector in standby mode.

• Press the following buttons on remote control in following order for less then five seconds each...

• RESET,

• <=== ,

• ===>,

• ENTER

Lamp timer is reset now.

This is also mentioned in user manual page 50
Thank you.

What documents you need for VPL-ES3, let me know please.
Have you replaced Lamp? give details of projector problem to find out solutons.

Hi there

Your Projector needs a new lamp and do remember to reset the lamp timer after replacing the lamp .

ey mann.sorry for my english ok.im from to argentina and i have the some problem with the cover-lamp.i try the six step for try a find a solution,but not working.the lamp try to star two oportunities but put in cover lamp again.you can help me please? thanks.b