How do I change the date? I don't have a manual.

That info is in the owner manual. If you don't have one check Here to see if you can download one.

See page 13 in the users manual

In case you don't have a users manual, click this link:

http://static.highspeedbackbone.net/pdf/olympus_SP-800UZ-Manual.pdf

Regards

Hope you read this message. I just noticed your message today on this site.
I bought an Elonex 705EB for my mum and had the same problem. It's not pressing the select key that changes the time. You must correct the time then press Menu button on yes (I had to press twice in row before it worked). I don't know why it works different from the manual. I found this out through a lot of trial and error!

I own a Navman MY55T and I honestly don't think you have to reset date and time. I never have for mine.

I have had a look online for you for your model of Navman and could not find anything within the user manual except how to change the format display for day/month/yer or month/day/year.

My only thoughts Sync it with your computer and it may pick up your computers time and date like many other peripherals do when they sync to your computer. Or it may well automatically change when it picks up GPS info as you use it in your car.

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/29897GE1_IB.pdf

I presume that you are winding the watch 24 hours to change the date.

You can shorten the time it takes to change the dates in the following manner:-

Wind the watch until the date changes, then turn it back until it passes 12 again and then turn it forward. Each time it passes 12 the date should increase by a day.

You may have to experiment to find how far past 12 in both directions to get the date to change.

Quicker to go straight to "Dymo" and download "FREE" Manual

Google, type in Dymo, up comes various series. Choose yours.

Good luck.

mcdevito75 here, That sounds about right, each watch is slightly different, some watches, have the date change at 10:30 PM and some at 11:00 PM, and if your Tag also has the month or day to change along with the date, this could account for the date changeing kind of late. I don"t think it"s anything to worry about.

The date and time can be changed in the "setup" menu.

mcdevito75 here, The manufacturer recommends you don"t try to change the date between certain hours as this could hurt the date changeing mechanism inside the watch, I don"t think you did any harm (LUCKY) and the date changeing 45 minutes before mid nite is just about right. BUT! if the date change was aliitle closer to mid nite at 1 time you can try to reset the date, here"s how, your stem should have 2 positions to change the date without haveing to cycle the watch the 24 hours 60 times. Slip a finger nail just under the crown and gently, gently lift the crown to it:s first position, it may take a little practise but you"ll get it, once you do, trun the crown and you should see the DATE change, if so set the DATE to 1 DATE before the DATE you want, now pull the stem out and set the correct gate and time of day. Your watch is now reset and date will change on time, around nid nite.