How do I change the main greeting from greeting 1 to greeting 2?

This is what I have:
Intercom 777
99#
password 1234#
9
3
1
1
6
* # (to by-pass selector code changes)
press 1 to record a new greeting, when done, press 1
* # to save changes

Note: Voicemail may ask for mailbox and password. Please consult your owner's manual for the credentials.

To change Main Greeting messages, here are the following steps:
-Go into the Supervisor Options

- To Access Supervisor Options:

- From main menu, press 6 for Supervisor Menu

-Press 2 for Routing Box Administration

-Enter Box Number that you are changing / recording

(Main Day Greeting is box 800, Main Night greeting is box 801)

-It will repeat the number you entered and prompt you to press 1 if its correct

-Press 3 to Modify

-Press 1 for Greetings

-Press 2 to Record Greeting

-Press 1 to replay current greeting or Press 2 to record greeting

-Press * (star) for current greeting
-Record greeting.

use this link to go to the page that will walk you through the changes that need to be made in order to change the main greeting.
http://www.key-comm.com/kxtda50100200-timechangefortelephonesystem-2-1-1-1-2-1.aspx

feature 981
enter password
listen for promt to change greeting.

for main greeting

press feature 983
if 3 digit extensions enter 1020000 if 2 digit extensions enter 120000

press AA
press grtg
press 1
press rec
press ok to end recording
press ok

press rls
To Listen to the Greeting, press Play. To ReRecord, press RETRY. Press OK to accept Greeting.

This may be specific for my system, but hopefully it helps:

Connect to your voicemail (for us, we can either hit the voicemail button or dial 1650)

Once in, press #6, it will ask for a mailbox number, dial *9998, it will ask for a password (the default is 1234#)

Press 5 to modify messages.

Press 3 to record custom service menus.

It will ask you to pick which menu (1-100). Our day menu is 1, and night is 2. I'm guessing yours will be the same.

From this point, it becomes the same as recording a standard voicemail greeting. It will play the current greeting and you can press 1 to re-record it. Do so, and then press #. Press 2 to accept and you're done!

to change the main greeting you need to get into admin programing F983 your also going to need a 7310 or 7324 or a T7316. You have to use the buttons under the LCD screen to navigate after getting into admin press AA
Press GRTG
Press GRTG again
and usually 1 is set for day
and 2 is set for night
press 1 then ok
Press REC.
Hope this helps

You need to go in to voice mail admin .
Feature 983 1020000
press AA
press Greeting
press greeting again
enter 1 for greeting 1
this should be your main greeting it could any greeting from 1- 20 , it depends on how it was set up but that should work fine .

Hi Cindy,

a couple of requirements here;

1~ you need to know the VM huntgroup number ie; number dialled to access the voicemail system
2~ the administrator mailbox number usually, 999 or 9999 by default
3~ the admin vm pin code which is usually 8642 by default

basic menu selection;
4 change system gereetings
1 change primary greetings

the system will supply voice prompts to allow you to change system greetings,
The superkey is the Blue key on the top left of the set

4 sys gereetings
1 pri greeting


if you are trying to change AA greetings follow the above just change the VM box number to the one associated with the Auto attendant alternativly you can configure the greeting from the System administration tool under the following ;

Sys Administration menu -> Voice Mail -> System audio files Update

select the AA greeting and greeting type

you must call in to your main number and get the main greeting. Dial 632 for system manager, you must know the password to get in. listen for mgr options than for opening greetings option. remember 1=yes 2=no. ldtsnj.com can help

I figured it out.

Feature 983
Network Password: if you are using 4-digit extensions: 10020000, 3-digit: 1020000, 2-digit: 120000
Press OK
Press AA
Press GRTG
Press GRTG (again)
Press the number for which the greeting is located - I guessed that mine was "1" and i was right
Press OK
Then you have the option to PLAY that greeting or RECord a new one

I hope that helps.