Can't print envelopes made by "Greeting Card Factory" v7 on an HP B209a-m. Cards (.fgc file) print OK but envelopes (.fev files) won't print (envelope won't go into the print area; spoolvs.exe take 99% of the PC, HP screen says "Now printing").

Doubler, Please use the word processor to do it. In Word go to file - page setup and select envelope and then the size of the envelope. And then on the printer look for a slot where an envelope is made. Insert the envelopes there and give the print command in Word.

You can use the program that comes with the printer. Its called HP Solution Center. There you can view your printers status, etc.. In addition you can choose to copy, scan or print files.

the reason could be because the size of the file could be too large.

Check to see if you are feeding the envelopes and 4x6 cards/photo paper correctly.

Both envelopes and 4x6 cards must be loaded and centered on the paper exit tray (not inside the paper input tray).

Printing envelopes:

• Up to 15 envelopes can be loaded at a time.
• The print side of the envelope faces down.
• The envelopesare centered on the paper exit tray.
• You print the envelopes with Landscape orientation.

Printing cards:

• Up to 35 greeting cards, index cards, postcards, or photo cardscan be loaded at a time.
  
• The print side of the cards faces down.
• The cards are centered on the paper exit tray.
• You select Automatic, Normal, or Photo print quality.

For images on how to correctly load the paper, download your printer user's guide:
http://support.dell.com/support/edocs/systems/prn946/en/index.htm

I also contacted HP and they directed me to a workaround which I have not implemented yet!

I'm printing wedding invitation envelopes (or A6) and had to set both my C4480 and psc1315 to a regular size 8.5x11 letter size but changed my margins to reflect the smaller size for my envelope with the left side of the screen being the more narrow margin. After adjusting the top margin accordingly, I fed the envelopes, flap side down and straight into the printer and voila...envelope addresses are printed. Good luck. Blu

try to use Export File Feature.

try to check the sixe of your envelope..check on the properties if the size that you did selected is the correct size of paper the you wanted to print.try to unplug the powercable of your printer and do not press the power button just unplug it immediately.press the power button for 5 secs. and insert the power cable..try to print

send me feedback for further troubleshooting,.,.,.

If you look closely at the very front of the paper tray, just to the left of the sliding thing that keeps the paper from drifting out of the front, you will see a couple of illustrations showing how to position envelopes in the paper feeder. For regular letter-sized envelopes, or even greeting card envelopes, place them face down with the top of the envelope pointing to the left as you are facing the printer. The return address area should be away from you. Position the envelope all the way to the right side of the paper feeder, then gently slide the envelope all the way back until it is stops so that it is accessible by the paper feeder. Bear in mind that it will be flipped over when it comes out. To avoid wasting an envelope, do a trial print on a piece of paper to make sure you understand the positioning correctly. Good luck!

Print on the Envelopes

1. Click File , then click Print .
2. Click Properties , then click the Features tab.
3. Change the orientation to Landscape and the paper size to envelope #10 .
4. Click OK .
5. Click OK again to print.