The phone can't find the bluetooth jwin jb-th130 How to power it?

Hi,
Yup that is possible as long as your Laptop is Bluetooth Capable that will work on your Laptop make sure that the Laptop Bluetooth Settings is set to be detected by other devices in the Bluetooth Settings.
Have a nice day.
mvincentc

Hello to pair your phone with your head set is first put your phone into search mode. Next is to turn off the headset. Your next is to push the center button on the headset for eight seconds until you see a blue/red flash.. On your phone you will then enter the pin code the code is 0000. if you have any more questions you can download the manual at http://www.jwin.com/support.asp?type=6&idx=7725.

You have to put your blue tooth device to discovery mode usually you hold the power button down for 6 to 10 seconds when turning on you blue tooth device then you will have to make sure to turn your blue tooth power on in you menu then you can add or search device once they pair you will need a pairing pin code .Most blue tooth device manufacture use a factory pin pairing code they are as follows 0000,1234,9999,or 1111 i hope this helps

I cannot locate a manual, but I checked several Bluetooth headsets and 2 hours is common.

If it's taking longer taking that there is a possibility that the cable has been damaged.
Any usb cable with the same connectors should be suitable.
Try your local electronics shop.

You could put "usb charger" into eBay to see a lot of cheap generic charges, pictures provided.
They should be perfectly adequate for testing purposes.
Again your local supplier may have better ones but around the same price Jwin will sell you a complete new headset.

This is always a last resort.

http://www.jwin.com/product_detail.asp?tab=2&idx=2597

I dont owe one.

http://jwin.com/download.asp?loc=/upload/product/JBTH130/jb-th130_qsg_022309ol-1.pdf

Well do set your phone to search mode to pair all depends on the cell phone but here are the steps:
http://intranet2.jwin.com/upload/product/JBTH130/jb-th130_qsg_022309ol-1.pdf
If you need further assistance let me know.
Thank you,
Lee

Did you try this?
http://www.fixya.com/support/r5009033-put_most_bluetooth_headsets_into_pairing

Hold the talk/action button for 2-3 seconds

Hey Wrong area to post it isnt a recommendation .. ny ways the passcode is 0000
i.e Four Zeroes