How do I replace a LG LMV1630ST microwave oven door handle?

The door comes in parts not the whole door. All you have to do is remove the plastic liner around the glass and you can get to the screws that hold the door in place. Go to sears web site and you can order the parts thru them they are pretty good about getting the parts for you

A suggestion---call or contact LG to see if what you want is even available---only other (a little crazy) is consider if metal having the handle removed and chromed.

I am sure, this YouTube video https://www.youtube.com/watch?v=nIdT4kS3noY will be helpful.

Admin: http://microwaveoven.co.in/

Unfortunately, about the only thing you can do is to replace the switch. We don't service microwaves that often so I am not to sure of where the switch is located on your unit. So here is the layout for your unit, and you can find the correct switch on the diagram and then look it up on the right side.

http://www.searspartsdirect.com/partsdirect/part-model/LG-Parts/Microwave-Parts/Model-LMV1630ST/3204/0123370/Z1006010/00004

On model LMV1630ST, it's located on the filter circuit board in front of where the cord comes into the unit.

You'll need to remove the oven from the wall, then remove the outer cover of the oven.

You can find the service manual at our site here.

You should consult your installation instructions.

If for some reason you don't still have your installation instructions, you can download them here.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

under the outer cover,its either a 10-15-or 20 amp ceramic safety fuse avail at most hardware stores, the amp rating is on the side of the fuse, if the new one blows then either the H.V. diode/capacitor or the magnetron can be suspects

Check repairclinic.com for parts on this unit. The door will run you about $121 item #1310935. If you just need the door frame assy. that's about $31 item#1300226. Good Luck.

the handle screws into position. one screw at the top and one at the bottom. you may have to take the door all apart to find those screws.

it may be easier for you to tape off the parts you do not want to paint and just paint the handle.

Yes they will, unless it very old. For Goldstar / LG / L.G. help, call 1-800-243-0000 (M-F, 7am-8pm CT, Sat 8-5 CT) and choose the appropriate prompt from the menu or visit http://www.lgservice.com.

We're happy to help and we appreciate your thoughtful rating of our answer.

Make sure the door is aligned and closes safety switches.