The zoom on my computer is set at 100%, when I change it to 75% it won't stay at 75% and goes back to 100%. What do I do?

On the upper right side of your browser window click on the three horizontal bars, click on settings, click on show advanced settings. Scroll down to web content, page zoom is set to 100% by default, use the drop down arrow to choose the setting you wish.

I’m happy to help further over the phone at https://www.6ya.com/expert/adrienne_b03fb46fc6334991

That is a fault in the touch screen have it repaired.

100 psi is around the pressure that the engine goes back to idle
it should start to go to fast rpm when the pressure drops to around 75 psi
if it is trying to increase rpm at 100 psi , the engine is under load and that is your problem

Clean the contacts on the lens? Your lens maybe defective need service?

• If you have a mouse with a wheel, hold down the CTRL key, and then scroll the wheel to zoom in or out.
  

• If you click the Change Zoom Level button , it will cycle through 100%, 125%, and 150%, giving you a quick enlargement of the webpage.
  

• From the keyboard you can increase or decrease the zoom value in 10% increments. To zoom in, press CTRL+PLUS SIGN (+). To zoom out, press CTRL+MINUS SIGN (-). To restore the zoom to 100%, press CTRL+0.
  

mcdevito75 here, It sound like the first tech. simply increased the zoom on your Monitor screen for his eay viewing and failed to restore it for you. Here"s how, on your screen in the lower right hand corner you should see 100% or 75%, this is the zoom, left clicl on the number and then check 100% ------ or even easier, left click on View at the top of your screen, then click zoom, now check the 100%. you can also check at View, the text size, this is the size of the letters on your screen. click on text size for large or larger or small. Hope this helps.

Try removing the battery and see if it changes back to the default settings.

which version of outlook u use to find out go to Help----> About

Hi Murpeg
What is the cleaning program? name?

Does anyone know anything at all about changing defaults (other than what the software provides for) in any programs on the iPAQ? If somebody knows something about ini (or other) files that might let me change these defaults, that would be most helpful. Thanks!