Pressing reset doesn't go to zero. sweep second hand goes to 57 seconds

Pull out the crown and use either a combination or one of the cronograph buttons, this will allow you to adjust the hand positions

Pull the crown to position 3 (fully out) and press push-button P2 (reset button) successively until the hand of the tenths-of-a-second counter returns to its correct position. Put crown back into position 1 (fully in).
Pull the crown out to position 3 and press push-button P1 (start/stop button) succesively to reset the chronograph seconds-hand. Put the crown back into position 1.
Pull the crown into position 2 (not fully out) and press push-button P2 until 30-minutes counter returns to zero. Put crown back into position 1.

Model: Classima Executives Quartz Chronograph

1) pull crown out to position 3 (most pulled out)
2) press and hold both buttons till the seconds dial makes a full flyback. Chronograph is now ready for reset
3) Keep pressing P1 button (for starting/stopping of the chronograph) until the seconds dial is at "0"
4) Press P2 button (for resetting chronograph) to switch to resetting the next dial - the 1/10s dial.
5) Keep pressing P1 button (for starting/stopping of the chronograph) until the 1/10 seconds dial is at "0"
6) Press P2 button once again to switch to resetting the next dial - the 30 min dial.
7) Keep pressing P1 button until the 30 min dial is at "0"
8) push the crown fully back in.
DONE