DFX 9000 error oC

A guess is that is refers to an optical character reader error (OCR). The error page lists it as an OC 16 error.

https://www.manualslib.com/manual/907209/Epson-Dfx-9000.html?page=110#manual

Error Code 15: OC Driver Error
This error occurs when the Mechanism Control ASIC detects that a
single phase of the OC Motor was energized for longer than the allowed period of time. This indicates a malfunction of either the HCPP motor, or ROM Board driver circuitry (TA10: STA485A), or both.
1. Check OC motor connector CNO/C on the Sensor Board.
2. Check both the OC motor and the OC motor driver circuitry on the
ROM Board. To replace the ROM BOARD If necessary, replace the OC MOTOR

Hi Good day!!

Error 13 is a printer error code that signifies that there is a paper jam. You need to check the jam in the entry if your system shows this error. Error 13 also indicates the need to replace the pickup roller in the printer.

http://support2.epson.net/manuals/english/sidm/dfx_9000/ref_g/TROUB_1.HTM

the above link will surely help u on what to do...

rate me if it does

i have a problem on my printer epson dfx 9000 with erro code 01 turn off your priner any one with solution?

Erro 0E on EPSON DXF-9000 printer

check print head built in thermistor and the carrier cable.

This error OE is linked with the Print Head Driver.
2 solution:
1- Check the print head cables (continuity, shortcircuit, connection etc..
2- Print head Driver on the Main Board is out of order > Change the Main Board.

head driver error:
chk carrier cable unit
worst ROM Board = service

09 : FAN1 driver error
0A : FAN2 driver error
0B : FAN3 driver error
0C : FAN4 driver error