Dont know how to work my blue tooth to my phone

Try holding one of the buttons down until the light starts flashing

your e370 does connect via blue tooth,i know i do it,maybe reinstall your blue tooth sofware on your pc, or it could be a port conflict in your pc,but the problem is with the pc,not the phone

Is there a blue tooth device built in the laptop. Usually you need a USB blue tooth device to be able to discover other devices.

try this, turn on the blue tooth of your headset and then go to the Bluetooth settings of your phone, search for the headset, once paired for sure that it will ask for a code just enter 0000, that is the default pass code for that.

Press and hold the phone key in till the lite turns purple then open up the mike and it will be in "paring mode"

6620 blue tooth is supported on Palm TX. Im not sure about Gzone. It does have limitations to it when using you TX to connect to a bluetooth cell phone for data service.

You can try the GPRS cell phone setting and see if it recognizes it that way.

ok it took me a while the way u need to do this pairing is easy they just explain it really bad.
in your phone find the add device
press the call button till the purple light comes on
open the FLIP(microphone part AND THE EAR PEICE!!! people for get the ear peice)
press ok and have your phone start searching
once it finds the device press 0000 for the pin
your all set i almost sure this will work!!!

The name of your bluetooth headset is the OmniTech (OT-020C).

This will be slightly difficult to explain without knowing the model of phone... First off, you need to ensure that you are using a bluetooth enabled phone. You will need to enter the settings and tools menu. From within that menu, you need to find either "connections" or "bluetooth" and select. Make sure bluetooth is enabled. There will be an option to add a new device.

On your bluetooth headset, hold down the power button down until the power light stays lit. This may take 5 seconds or more. Now your bluetooth is in pairing mode.

Back to the phone, you want to hit "add new device". On certain models of phone you additionally have to select "search for devices". Your phone will recognize any headsets in pairing mode. When it is finished scanning, allow the phone to add your headset. It will ask you for the device pin code. This pin code will be 0000.

I hope this answered all of your concerns. If you are having trouble with finding the correct settings from within your phone, reply with your phone model and I can give you more detailed information!

try 0000 worked for me!

after it holds a steady charge, try holding the power button for a few seconds. if you get a blue light (blinking or solid) then its on, obviously. holding most power buttons on bluetooth devices will put them into pairing mode, as soon as you get a solid light, you can connect it to your phone...and if you just bought the headset, you should have an instruction manual. it will tell you in there how to make it work