Download driver for the toshiba e studio printer for windows vista 64 bit

This driver works for me on our Users 64 bit Win 7 Machines. Installed as local printer.

Win XP/2003/Vista/7/2003/2008 64 Bit PCL6 12/22/10 4.5.98.0

http://business.toshiba.com/support/downloads.jsp?site=usa






If networked create a new port and enter the printer IP.

Use the Vista driver in Windows 7. Before downloading the printer driver, check if your Windows 7 is running on 32-bit or 64-bit operating system. On your computer, go to Start menu > right-click on Computer > click on Properties. Take note of the System Type.
Use the link below to download the corresponding driver for your operating system:- Lexmark P6350 Driver for Microsoft Vista 32 bit and Windows 7 32-bit- Lexmark P6350 Driver for Microsoft Vista 32 bit and Windows 7 64-bit

Simply follow the steps on your computer screen to complete the installation.

Use the Vista driver in Windows 7. You can download and install the driver in the Lexmark website. First, check if your Windows 7 is running on 32-bit or 64-bit system type. Go to Start menu > right-click on Computer > Properties. Take note of the System Type.
To download the driver, use the links below: - Lexmark P4330 Driver for Vista/Windows 7 32-bit - Lexmark P4330 Driver for Vista/Windows 7 64-bit

Toshiba e-studio 166/206 drivers are available Toshiba Official Support
Click 'Support & Drivers'
Choose B/W Copiers
Choose e-Studio 166 (NOT 206)
Select the Complete drivers and download/ Install the required Drivers( This package supports Windows 2000, XP, Server 2003, Vista, Server 2008, Windows 7 in 32 and 64 installations.)
You may also refer to the product manual

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Hi there,

Here's the link for your toshiba e-studio 166 printer http://www.copiers.toshiba.com/support/downloads.jsp?SELCTD_MODEL=e-STUDIO166&AXN=SELCTD
It supports Windows 7 32 and 64 bit.

"This package supports Windows 2000, XP, Server 2003, Vista, Server 2008, Windows 7 in 32 and 64 installations. "

Happy installation.

Keep me posted.
Jas

Hi. Try downloading the driver available in the Lexmark website. The driver is for Vista operating system but it is compatible with Windows 7. Before downloading, check if your computer is running on 32-bit or 64-bit operating system by going to Start > right click on Computer > Properties. To download, click on this link to the Lexmark website. http://bit.ly/ajIYH7 . Then, click on the Microsoft tab on the center of the page. Download cjr4300EN.exe for 32-bit or download cjs4300EN.exe for 64-bit. Hope this resolves your problem. Good luck!

For Vista there is only a 32-bit driver. I've already tested, it doesn't work

What kind of interface u're using ? USB cable or network cable?
if USB cable, currently only support until Vista 32bits.
But if running networking, Vista 64bits is supported.

You update your copier driver for 64 bit windows suppoted.www.toshiba studio 161.com

The Toshiba website does not show Vista 64 drivers for the e-Studio 120 copier/printer, but it does say that the model is e-Bridge ready. You might call a Toshiba representative and see if you can use the e-Bridge Vista 64 drivers instead. Or, if they are planning to deliver Vista64 drivers soon.

e-Studio 120 Drivers, Windows 2000/XP/Vista32
http://www.copiers.toshiba.com/support/controllers/e-studio120.shtml

e-Bridge Drivers, Windows Vista64 and more
http://www.copiers.toshiba.com/support/controllers/ebridge352-452.shtml