How do I troubleshoot my Magic Chef electric built

Possible locations shown in article at the web link below:

https://www.hunker.com/13409112/how-to-find-a-model-number-on-a-magic-chef-oven


How to Find Model Number on Magic Chef Oven Hunker


Quoting the link above:

Step 1 Open the oven door. At the top, left-hand corner of the open oven, locate the model number tag.
Step 2 Check under the burners. Lift each burner on the stove off to see if the plate is underneath. Do this if the plate is not located on the inside of the oven.

To need but for get a dictionary? Help Me Find My Model Number

This is usually caused by the main control. The relay for the broiler has likely melted into the on position. Here is a link that should help Replacing oven ERC

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

sounds like you have a bad broiler ignitor

replace ignightor

25 yr old oven...........so I bought a new one with a few blemishes for $200.

your not getting enough air to fuel ratio and you need to open the air vent just a quarter of a turn

i have a magic chef gas range. broiler work, burners work, fan works when you turn the oven on, but oven does not get hot. could it be the electronic ignitor or does even have one.

hi .thanks for the question . A very common problem with gas ovens replace the igniter thanks the appliance doc