I need an owners manual. i bought the whirlpool duet washer and dryer and the dryer has a manual but the washer did not. the guy at the store said i could get one on-line. i know how to use it but i want know how it works. it seems odd to me.

Go to a hardware store and buy a longer hose.

F-20 on display (Water Inlet Problem-no water or insufficient water supply)

1. Select PAUSE/CANCEL twice to cancel the cycle.
2. Unplug washer or disconnect power.
3. Are water faucets completely turned on?
4. Are screens at inlet hose connection clear of obstructions.

To view the manual in an Adobe PDF format right click and select open to go to the owner's manual site.
http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=WFW8400TE&siteCd=MT_EN_US&userType=Consumer

No more than ordinary.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

http://www.fixya.com/support/r4964670-get_manual_most_any_electronic_device

Click the link to your owners manual. If there is any problem with the link the manual can be found at whirlpool.com look for manuals and literature and it will allow you to type in your model. The link is only for your washer. I do not see the model for your dryer so you will need to go to whirlpool.com for the dryer manual.
Please rate this post. Thank you

You have to slam the dryer door shut. Sounds silly... but it worked. Guy said it has to do with it being stacked??

http://www.manualnguide.com/download/manual-guide/whirlpool-wfw9600t-duet-washer-owners-manual.html

it's probably the timer or a cold-water supply problem:

• It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.



• It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Try pressing the End of Cycle button on the far right and holding it for more than 3 or 4 seconds.  It should reset.

the part that needs to be replaced is the user interface. this part is not cheep check you owners manual to see if you have any warranty left