Hi my quad wont spark can you help ?
After changing teh coil did you check the gap between coil and kly wheel and as colin said if you spray wd 40 when trying start at the inlet carb if thers a split then the reves wil rev
It's the air inlet manifold where it joins from the air inlet to the carb and manifold to the carb you will def find a small split I have had the same problem ps hope this helps
Things to check: 1. Make sure the coil is grounded to the frame of the quad. Not against a painted part of the frame but a raw metal part. 2. The stator could be bad. 3. Could be out of time. I would try these things first, hope this helps. Good luck.
2,221 views
Usually answered in minutes!
×