Hi, does any one knows about which type of RAM is suitable for the mother board MS-7168 VER 1C for the HP PC and whats the max capacity mine has only got a 512mb and i can see it has four ram slots in the mother board thank you! love to hear from any one has the answers.

Turn off the computer, pull the ram and get three more of the exact same type. If it's 72 pin (standard) 2400, then get the same. Preferrably the same brand. When you load identical memory, some motherboards offer you the option of pairing the ram to get faster response.

Here you go....
CPU Support

• Socket 939
• Support AMD Sempron, Athlon 64 and Athlon 64FX processors.
• Support 800 and 1000Mhz HyperTransport (HT) interface speeds.

• Four 184-pin DDR SDRAM DIMM sockets.
• Serial Presence Detect
• Support for single-sided or double-sided DIMMs (DDR 333 / DDR400)
• Support for up to 4 GB system memory
• Asynchronous HyperTransport and memory controller interface speeds
• Supports dynamic link width and frequency change
• Non-ECC RAM (ECC memory will run in non-ECC mode)
• Single and dual channel mode operation:
  • Single channel mode with single DIMM, non-symmetrical population or non-identical DIMMs
  • Dual channel mode with 2 or 4 identical DIMMs, populated symmetrically