I have a frigidaire gallery heavy duty dryer, gas burning. It has heated/dried my laundry less and less, and now does not seen to heat up at all. What part do I need to replace?

diagrams, parts list
https://www.ereplacementparts.com/maytag-de313-residential-maytag-laundry-parts-c-461666_462525_462889.html

Hello Chuck, thanks for your inquiry
Based off the information you have provided I have identified a few possibilities as to why your dryer is not heating could be the element, thermostat, or control panel. Each component controls the heat within your dryer and if one goes out it is possible that can cause the rest to not function properly. To accurately find out the reason to why your dryer is not heating I would recommend having a professional come out. Hopefully this is helpful. -Matt

Good Afternoon Friend, thank you for your question!

I understand you are seeking a replacement dryer belt for your Frigidaire laundry center, GLET1031FS. The replacement dryer belt part number that you would need to order is 137292700.Most parts can be purchased directly from the manufacturer or through a parts distributor in your area (part numbers may vary based on distributor). Hope this helps! - Z

sounds like you may need a new thermo switch. good luck

If you live in Pasadena, CA and you need a Dryer repair service our professional technicians will perfectly repair your dryer as fast as possible. All you need to do is to call at (626) 460-0903 or visit our website http://www.appliancerepairspasadena.com .



Dryer repair Pasadena CA Bosch LG Electronics Amana Beko

This is most likely a bad ignitor(can be verified by inspecting burner and ignitor with the machine running. But I would also check the vent pipes from the dryer all the way to the outside to make sure there isn't any blockages or restrictions. I would need a model number to provide more specific details.

Sounds like the bearing is gone, call a repiar man or buy new as repairman 100 per call

repairclinic.com is a great site to buy parts from.

Look inside door and get the model number for me. Could be igniter, gas solenoids or temp control switch inside. Let me know, Thanks Sea Breeze

The identification label from a Frigidaire Gallery Commercial Heavy Duty Moisture Sensor drier has come off. I need to download operating/user manual. How can I get the serial no. or model no. The drier is 4 years old.