How to set time & date in Esprit chronograph watch.

Question moved from Lands Phones category.

SEIKO - A158 5040

Digital Watch Library http://www.digitalwatchlibrary.com > DWL > seiko-a1...

SEIKO - A158 5040 - Digital. Released in 1978 Vintage Digital Watch - Brought to you courtesy of digital-watch.com.

SEIKO QUARTZ Cal. A159 Alarm Chronograph

My Retro Watches https://myretrowatches.co.uk > uploads > 2020/09
The A158 Alarm Chronograph model can be set to give a time signal ... QUARTZ. ALARM-CHRONOGRAPH. START/STOP. DATE/SELECT. STOP-ALARM. WATCH SET TIME SET LAP STOP ...
3 pages

Missing: 5040A ‎' Show results with: 5040A

Instruction ' Seiko Watch Corporation

SEIKO WATCH https://www.seikowatches.com > customerservice > ins...
Seiko is one of the few fully integrated watch manufactures. We design and develop our own movements using leading-edge technology.

View the instruction manuals - Invicta

invictawatch.com/service/view-the-instruction-manuals

Enter your 4 or 5 digit model number to locate your watch. RECEIVE THE NEWSLETTER SOCIAL MEDIA · Terms & Conditions Customer Service Service ...Missing: 12983 ‎subdial

Setting Time Date Invicta Watch Chronograph - SmartBargains

https://www.smartbargains.com/.../Setting-Invicta-Chronograph.html

Know how to set time, day, and date in the Invicta Watch Chronograph. ... Invicta sells several different kinds of chronograph watches, with the two main ... and the Invicta Big Date and Day chronograph - the subdials that measure seconds and ...Missing: 12983

Invicta Reserve 48mm Octane Swiss Made Quartz ...

read the instruction manual, Geneva Watches with Two or Three Hands

1. Pull the crown out until you feel a click.
2. Turn the crown counterclockwise until you have the correct time.
3. Push the crown back in to set the time.

Geneva Watches with Two or Three Hands and a Date Window

1. Pull the crown out until you feel two clicks. This second click position allows you to set the time.
2. Turn the crown counter clockwise until you have the correct time. Push the crown all the way in to set the time.
3. Pull the crown out until you feel one click. This first click position allows you to set the date.
4. Turn the crown counterclockwise until you have the correct date. Push the crown back in to set the date.

Multi-Function Geneva Watches

1. Pull the crown out until you feel two clicks. This second click position allows you to set the day.
2. Rotate the crown counter clockwise until you have the correct day. Push the crown in to set the day.
3. Pull the crown out until you feel a second click to set the time or the 24-hour hand.
4. Turn the crown clockwise until you have the correct time, then push the crown in to set it.
5. Pull the crown out just one click to set the date. Turn the crown clockwise until you have the correct date, then push the crown in to set it.

Geneva Chronograph Watches

1. Pull the crown out two clicks. This second click position allows you to set the time.
2. Turn the crown clockwise until you have the correct time, then push the crown in to set it.
3. Pull the crown out just one click to set the date. Turn the crown clockwise until you have the correct date, then push the crown in to set it.
4. Stop and start the chronograph by pressing the PA button, located above the crown.
5. Reset the chronograph by pressing the PB button just below the crown. The PB button returns the chronograph second and minute hands to their original positions of zero.

Automatic Geneva Watches

1. Wind the mainspring by turning the crown 15 to 20 times clockwise.
2. Pull the crown out until it clicks.
3. Turn the crown counterclockwise until you have the correct time, then push the crown in to set the time.

Tips & Warnings

• Do not set the date or time between 8 p.m. and 3 a.m. to avoid damage to your Geneva watch. The gears sit too close together during these times.
• If your Geneva watch becomes wet, wipe it dry as soon as possible. Keep your watch away from saunas and hot tubs, as the extreme heat diminishes the watch's water resistance.

Read more : http://www.ehow.com/how_6134550_set-date-time-geneva-watch.html

i don't know about on line instruction.
but i could help you ....
there is two position for crown 1 and 2.
bring crown on position 2 and turn crown clockwise to change TIME, DAY & DATE.

bring crown position 1, and turn crown counterclockwise to change DATE.

your watch has Chronograph / Stop watch.
use that please press right TOP button chronograph will START, press again Chronograph will STOP.

Press bottom button to RESET Chronograph.

hope it will help

how to change the day of a esprit chrono? i can change in first position the number of the day but not the name of the day turning clockwise in first position. anticlockwise doens't do nothing. what to do? in a cronotech how to change the hour of the chrono? i can put the arrow of seconds in 12 line, but the hour counter remain in position 10 hours. what to do?

hello
i have hour nautica ... number A29506.. i wants to change date ... please tell me how to chenge .. maybe you write in my e-mail
[email protected]
tthenks..

The Lupah has a chronograph so dont worry about the sub dials while your setting the time. Pull the crown out to the first position and set the time. For the date pull out to the second position and set the date.

To set the chronograph sweep arm pull the crown out and press and hold down the start button. The sweep arm will move into position. Stop it on the 12:00 or 0 position.

go to Buliva web site and look for the chorograph 561/598
FEATURES
1. Hours, minutes, seconds and date display.
2. 60 minute Chronograph (CHRONO) with minutes and
seconds display.
3. 24 hour hand, permanently synchronized with the normal
12 hour hand.
A. SETTING THE TIME
1. Pull the crown out to position “3” (See diagram). If the crown has
a “screw-down” lock, then unscrew the crown lock first by turning
the crown toward you, then pull it to position “3”. Do not forget to
screw the crown back “IN” after all setting is completed.
2. Turn the crown towards you (hands moves clockwise) until the
date changes at approximately midnight.
3. Continue turning the hour and minute hands to the correct time.
If it is afternoon you must go past 12 o’clock again (noon) to set
the correct time.
4. When the correct time is set,push crown back to position “1”.
B. SETTING THE DATE
1. Pull crown to position “2”(See proceeding diagram).The watch
will continue to run.
2. Turn the crown away from you until the correct date appears.
3. Once the date is set, push the crown back to position “1”.
Note: Do NOT set the date between the hours of 8:00 PM and
3:00 AM.This would not damage the watch,but the date may need
to be reset later.
C. CHRONOGRAPH (CHRONO) ADJUSTMENT
If the chrongraph second hand is not positioned at the proper
starting position (12 o’clock or “zero” position), use the below
procedure.It does not need to be repeated unless the watch
receives an impact sufficient to move the hand out of position, or
the Battery has been changed.
1. Pull crown out to position “3”.
2. Push button “A” to move the Chrono Second hand (long hand) to
the “0” or 12 o’clock position. Each button push will move the
hand one step – BUT holding the button down will advance the
hand rapidly.
3. Push crown back to position “1”.
D. USING THE CHRONOGRAPH (CHRONO)
Note: The maximum chrono reading is 60 minutes, However the
chrono will continue running once 60 minutes has passed. The
resulting one hour periods may be added together mentally to keep
track of longer periods.
For example – If you know that approximately one hour has
passed since you started the chronograph, and the chrono reads
25 minutes, then you know that the chrono has been running 60
minutes plus 25 minutes, which is one hour and 25 minutes.
1. Push Button “A” to start the chronograph. Push button “A” again
to stop the chronograph.
2. Push button “B” to return the two chronograph hands to the
“Zero” or starting point.
3. The Chronograph can be stopped and started again
(Button “A”), repeatedly, to “ADD” times together.
BOOK NO. 561/598 Chrono FS00/01/10
BOOK NO. 561/598 Chrono FS00/01/10
Watch Setting Guide
4/2007

KEEP YOUR FINGER ON THE BOTTOM LEFT HAND BUTTON. WHEN IT STARTS BLINKING PRESS IT AGAIN.USE THE OTHER BUTTONS TO CHANGE TIME.

The three buttons are the Chronograph start button (top), Crown (middle), and chronograph reset (bottom).
To set the watch pull the crown out to the first position and turn it until it is on the right time.
To set the date pull the crown out to the second position and rotate until you have the right date.
Be sure that when you set the time that you are in the right AM or PM. DO this by watching when the date turns at the 12:00 position. The date changes at midnight so that would be AM.