How do I remove the toilet seat for duravit

copy and paste link

https://terrylove.com/forums/index.php?threads/duravit-fill-valve-inlet-valve.83232/

Local Plumbing Supply that the contractor go to

you can get replacement screws at home depot or lowes if the hinge is broken you need to replace the seat

I think our toilet is a Duravit.
Close the seat and the lid then have a look at the back of the hinges. If you can see a small hole in the back of the hinge there will be a grub screw in the hole and you can undo it with an allen key (not sure what size - you'll have to try a couple)

I have not been able to find a "tribeca" on the Duravit website but on the site of one of their parts distributors I found the Duravit Toilet Seat DUR 006331000. Is this your model? Starck 3

On the Duravit website this product looks very similar but not the same number.

I was not able to find replacement hinges for this model sold separately. You might consider using their Find a Retailer feature to find an outlet close to you where you might make inquiries or order hinges and/or a new lid.

Information on your product can be found here along with measurements for installation. However there does not seem to be detailed installation instructions.

http://www.duravit.com/products/series/duraplus/toilets/toilet-close-coupled--022901_toilets_91994_useo6q3rng.html#


Suggest you review the following series of videos which provides detailed instructions on toilet removal and replacement.



Trust this is helpful.

A fairly easy ( but messy ) fix - get a replacement tank to bowl gasket and bolt kit, shut off water supply, drain tank, remove bolts ( you might have to cut, depending on your water source and minerals in your water). Remove old gasket and clean surface with 00 grade steel wool. Replace gasket, install new bolts, remount tank.
Good luck!!

Unfortunately you won't find a universal replacement part to work with this seat which you would commonly find at your local hardware store. I've looked through the Durovit site and could not find a parts catalog. Try using the find retailer option on the manufacturers site and if there isn't a retailer in your area contact the manufacturer directly to see if they supply parts for their seats. I'm guessing they don't and you would likely have to purchase a new seat.

http://www.duravit.com/service/find-a-retailer-useo6suuk8.html
Duravit USA, Inc.
2205 Northmont Parkway
Suite 200
Duluth, GA 30096
Phone +1 770 931 3575
Toll free: 888 387 2848
Fax +1 770 931 8454
Toll free: 888 387 2843
[email protected]

r u sure ur seat doesn't have a screw to tighten it from above? alot of these back to wall pans that we fit tighten from the top using a philips screw driver