Lcd monitor hi how i can decrease vrtical screev size in lcd monitor(v-size)?

To help you change the brightness and contrast settings from the LCD monitor, please follow the instructions mentioned below,
The control buttons are located at front panel of the monitor. The Brightness Button is used to select the Brightness/Contrast adjust functions. Press to switch functions or adjust settings.
To decrease the brightness or contrast press (-) button & to increase (+) as per your adjustment.

GuruAid.com

Hi there,

Try 'right clicking' on the desktop area and select screen resolution, from here you are able to change the size of your display to match the screen (don't worry if you select one that is incorrect and can't click on it, it will automatically revert to the setting before).

Good luck.

Decrease the resolution 1280X800, or 1024x720.

Decrease the resolution 1280X800, or 1024x720.

Hi,
Just press the menu button at the bottom the screen bezel and then select brightness. You can decrease and increase the brightness by pressing the plus or minus button .
Hope this helps
Thanks
Dennis

Hi.

One way is going to display properties and decreasing the value of screen resolution. Please let me know what operative system you are using, so that I can help you further.

Thanks.

Ginko.

Hi,
By following these steps u can adjust the brightness

Step 1
Press "Menu" on your LCD's display panel (usually below the screen). Various display options will be shown on the screen.
Step 2
Select brightness from the options. This is usually indicated by a sun. Use the "+" and "-" buttons on your display panel to increase or decrease brightness.
Step 3
Select contrast from the options. This is usually indicated by an oval half black and half white. Use the "+" and "-" buttons on your display panel to increase or decrease contrast.

Thank you

Hi,
You can adjust the monitor picture size settings & position from the menu button on your monitor.

re-adjust the vertical and horizontal size then exit the menu

LCD monitors auto adjust and use a fixed resolution. It's impossible to reduce the vertical scan. The only what I could think of is to specify a widescreen resolution if the monitor is not widescreen and this may only work if you are connected by DVI cable. Sorry!