Hi,
I am not able to turn off the progressive scan feature on my sony dvp nc 85h. When i press the progressive scan on the player( no progressive scan button on remote) it only switches between P.Auto and P.Video but it's not switching to Normal( Interlace) mode and as a result picuture on my tv splits into two. Tried holding the stop button on the player and on the remote for 5 seconds but it didn't worked.
Please help me out to turn off the progressive scan feature.
Many thanks,
Raj
If it works like my sony RDR-GX315 just press the pause button on the player itself and hold for 5 seconds.
Are you pressing the Progressive Scan button on the front of the Player? You need to look at the BACK of the Player. There is a manual switch just below the words "LINE OUT". This needs to be moved to the left where it says "Normal"
Try this please!
Brian
Did this work for you Raj?
Thank you, please rate my help as FIXED'YA if it was a success!
If not, let me know, I will help you find the answer!
OK, the manual I was accessing for you originally was incorrectly listed. I have found the correct model for you. My apologies.
Are you using an HDMI cable? This will not allow your Progressive Function button to switch from P AUTO or P VIDEO. If you are using an HDMI cable, please disconnect it, and then try to push the Progressive button to change it to the proper NORMAL setting. You should be able to then reconnect it.
If not HDMI on your setup, please describe your setup (video and audio cables used).
Please let me know if this solution helps!
If you are disconnecting your HDMI, be sure to disconnect it from the back of the Sony DVD player, not just the TV. Thanks
I will suggest two more options:
The first is to disconnect the power cord of the DVD player. Leave it unplugged for a few minutes. Meanwhile, please disconnect the Progressive cables from the back of the DVD player. Plug in the DVD player, then try to push the Progressive button to change it to the proper NORMAL setting.
If this does not work, please try to RESET the settings of the DVD as described on page 64 of the manual.
Let me know what happens next.
One other thing to try, is to see what the video looks like if you hook progressive cables directly to TV, and bypass the AV receiver.
Hi, sorry Component video cables (Progressive)
I do not understand why the button won't work, unless the unit thinks that the HDMI port is being used. Then it won't allow the button to be used for anything besides the 2 progressive settings. You could try looking at the HDMI input jack at the back of the unit to see if there is anything obvious, however I really don't think that you will see anything.
If it were me, I would want the higher quality signal, so I would try to bypass the AV receiver for the Video signal from now on!
If you feel that I was helpful, you could change my rating to FIXYA to help my rating, or you can leave it alone--either way I was glad to help!
Brian
×
1,935 views
Usually answered in minutes!
Thanks for your suggestion Brian, i will try this one and let you know the result.
Brain,
Thanks for your suggestion once again but there is no manual switch below the "LINE OUT".
Thanks,
Raj
Hi Brian,
I have connected this dvd player to Onkyo AV receiver. Following are the connection details.
DVD player->Component Out(using Red Green Blue cables )->Component Video DVD In->Onkyo Receiver->TV screen
And also I am using a Optical cable from dvd player to AV receiver but i am not using any S-Video cable or HDMI cable.
Please let me know if you need any more details to help me out on this issue.
Thanks,
Raj
Hi Brian,
Thanks for your quick reply.
Could you please what Progressive cables means?
By the way i have already tried reset option what they described on page 64 of the manual but no luck. It didn't turned off progressive scan feature.
Thanks,
Raj
Hey Brian,
I removed all the component video connections and connected the dvd player to the receiver normally through dvd player->line out->(dvd in ->receiver-> monitor out)->TV monitor. Still the progressive scan feature on but the video is displaying normally now. Everything is alright except could not turn off progressive scan feature.
Thanks for all your help, you saved my life ...and let me know if you have any suggestions to turn off progressive scan.
Thanks,
Raj
Brian,
Thanks for all your help once again. You are exceptional in troubleshooting my problem.
Thanks,
Raj
I can't get my SLV-D300P to work it seems like every button I push gets me a blue blinking progressive light. It wont eject, play or respond in anyway. I do not see in the manual how to reset factory setting or turn off progressive. Thanks for any help.
Lee
×