The handle can only be changed by separating the outer and inner shells of the door. You can pull the outer shell off the inner shell by removing the three screws at the end of the door and then using firm force to pull the shells apart. It helps to gently pry along the bottom, top and inside (nearest the hinges) with a thin flathead screwdriver or other very thin metal object. You don't have to get it all the way loose; just a little is fine. You can then use the two clasps on the back of the door (that hold it shut when it's closed) to pull with. I found that inserting a slim screwdriver into the lower clasp and using that as a handle (not a lever!) gives you a better grip. Hold the outer shell of the door with your left hand while pulling the inner shell in the opposite direction. Be carefull not to twist or bend the clasps; they are plastic and will break. The shells will pull apart and then you can access the screws that hold the handle. Change the handle then press the door shells back together. Make sure they are snug all around. Replace the three end screws and you're done.
523 views
Usually answered in minutes!
I have had my microwave oven for 2 years. The handle broke off and I would like to replace it. I am pleased with the operation of the oven but have not been pleased with the assembly.
When I popped of the vent to clean it, one of the plastic hinges also broke off.
Sheila Edwards
[email protected]
I have the same problem with this microwave. The handle broke off and the vent hidges came completely off. Now I have to replace both the door handle and the vent fixture. The microwave works fine but the assembly and parts are pooly made. Have you found the handle part online?
The vent has broken on our microwave to. I was told by kitchen-aid it was going to cost $110-150 for this piece of plastic! Does anyone know somewhere I can find one cheaper.
Very helpful.
My unit has NO screws to undo...so is it just pry it apart??
how do u change a door handle
thanks
×