Perfect pic on top half of screen bottom half blank

Depending on which email service you are using, I.E. Hotmail, you may only be getting a screen shot of the email. In other words it will only show exactly what your seeing on your screen if you simply right click and print. Hotmail has a little ACTIONS with a downward pointing arrow on the right side of your screen. Click that and select print and it will print the actual message instead of a screen shot of the message. I have to assume other email servers use similar techniques to print the actual emails instead of just screen shots. Hope this helps.

CHECK C2C52 10 UFD @ 50 V OFF THE BASE OF Q2C51 ON THE SIGNAL PCB. 2. CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01 AND IC2P01 PART # 270P466020 (9-VOLT REGULATOR). BOTH ARE ON THE SIGNAL PCB.

Sounds like a back-light fault. Check its back-light inverter. To get more details, http://electronicshelponline.blogspot.com/Pull up older posts.

You have either the circuit board that drives that half of the screen(one for top and another for the bottom) or you have a bad display panel.

use channel 0...10..20...

Test it with an external monitor if it works fine then you will need to replace your LCD screen.

This is one of those things that I regret to say but the only way to repair this would be to order a new Flex cable. the flex cable is a small flat ribbon cable that connects the bottom half with the top half. It would be easer to replace the entire thing instead of just the ribbon cable

do me a fovor, i need your firmware version? to do this, press Input 619. in the center of the bottom of the screen, is three digits 5?.? please provide me with these numbers. you may just need firmware updates.

Take it to a repair facility, don't be a cheaps ***.

Blue STK392-040 Convergence IC bad = replace both with
first quality parts = NO generics,they don't hold up. I USE
PANASONIC with great success................T.