Emachines model t4010 window s xp. need a driver

Use an Ethernet cable to connect your computer directly to the DSL modem, bypassing the router, turn the modem off, turn the modem on, wait 60 seconds, and restart your computer.

Does the Ethernet lamp still blink when Windows is booting, and when you are using the Internet?

Turn the DSL modem off.
Turn the router off.
Turn the computer off.
Disconnect the Ethernet cable from the modem, and connect it from the computer to the router.
Turn the router on, and wait 60 seconds, then turn your computer on.
After Windows is running, click Start.
Click Run
Type CMD
Press Enter
Type IPCONFIG
Press Enter
Look for output like: default gateway........ 192.168.123.456
If the string starts with '192.168', then your computer *IS* "talking" to the router.
Now, use an Ethernet cable to connect the WAN port on the router to the DSL modem.
Turn the modem on.
Turn the router off.
Turn the router on.
Wait 60 seconds.
Restart your computer, and you should be able to web-surf.

Use a regular Windows install disk and find from here
http://www.emachines.com/support/drivers.html
and install the drivers yourself.

HI jar5. Did you install the ethernet driver after the Windows reinstallation? The DSL modem uses 2 interfaces. The USB and the Ethernet. YOu can use the modem´s Driver to use it thru the USB or you can use another computer go to the emachines´website and under support or drivers select your model and download the drivers because probably you also dont have sound, etc. I hope this helps. Please do not forget to rate and provide positive feedback for our fast - free support today. Thank you :D

Intel Pro/100 and PRO/1000 Network Driver. This is the driver you need for this model. You can download it right from the emachines web site.

Ok download drivers for vista then extract and find folder VISTAx86 open and right click net8185.inf and choose install option, if not install and have problem post coment rere, "dont work" ang find for xp, link here for official

You actually don't need an executable or a setup file to install the driver. When you unzip the set of files, put them on a location on your C:\ drive where you'll know your'll find them like c:\drivers\ethernet (just as an example) Go into device manager and under the device driver for the ethernet controller, right click and then go to "Update Driver." When you get the Hardware Update Wizard, select, "No, not this time" and choose "Install from a list or specific location." Check the "Include this location in the search:" and then browse to the directory where you extracted the files.i.e c:\drivers\ethernet\ and click next until the wizard finishes installing the driver.

I hope that makes sense if you need further clarification please reply back to this post. Please don't rate me until I help you resolve your issue. I will help you resolve it.

If you have the "Windows XP" operating system then follow these instructions...If you have a second computer with an internet connection then you can search on the internet for that driver...type the make and model of your computer plus the word "ethernet driver" and after you find it you just download it into "My Documents"...after that, copy the driver onto a blank CD disc...Take the CD and put it into your notebook and it should open and extract the file ..If it doesn't open up when you load the CD, go into "My Computer" and then double click on the "CD/CDRW/DVD/DVD-RW drive...restart your computer and remove the CD from the disc drive...Now plug your DSL into your ethernet port and see if it works...if it still does not work then go into "Control Panel" and then "Network and Internet Connections" and then "Network Connections" and then "Create a New Connection" and then follow the instructions...restart your computer and see if it finds the ethernet port and receives the signal through the ethernet cord

This computer runs an Intel® PRO 10/100Mbps integrated Ethernet hence if you are running windows XP or Vista you should not need to install it. it will do so automatically. may I ask if youa re getting errors when you connect to a network over wired?

You should be able to find all of the drivers you need for your computer here http://www.emachines.com/support/product_support.html?cat=notebook&subcat=M-Series&model=M2105

I had the same problem. The drivers on the manufacturer's site did not work. Only the original drivers on the CD that came with the motherbaord.