Clicks but won't come on, no picture - Toshiba 32A42 32" TV

Your problem could be any one of the boards in the set. When a flat screen attemps to turn on, but finds an internal problem, it defaults by clicking off to keep the remaining circuits and boards from buring up. You'le have to take the tv to a shop. Sorry that I can't be of more assistance.
"Original Radio Man"
Ed

The switch assembly is not making contact, needs to be repaired.

not knowing the model number just a general answer: Click is likely a mechanical power relay that should do that--problem likely in power supply of set or something triggering protective shutdown elsewhere in set, a bit like saying my car won't start as a number of different reasons for this issue.

This could be a case of overheating.
First question, did the no signals sign appear out of the blue?
Check inside for melted components.
Clean your computer, remove all dust.

Check back with me.

Your video card is bad.Go to My Computer-Right click-Device manager -check any yellow signin the video/sound device if any and right click then update.If this work was the driver if not change the video card.

I had this problem this afternoon, and it resolved itself when I took the memory card out. It's been fine so far, all working as normal again! :)

Power off the notebook, remove power cable and battery. Then try inserting a paper clip into the small hold in the CD drive to force eject the tray. Make sure you have powered off device and removed battery before you attempt.

There's likely a problem with your shutter, maybe it won't be properly triggered by the electronics.
You should let someone from a camera store look at it, there won't be an easy "at home" solution.

Hi! your printer need to print head alignment requirement.
click> Start
click> control panel
click> printer and faxes
you can see there your printer icon right click
choose printing preferences
then click maintenance
click print head alignment.
wait for test print finish.
see attach picture.

i hope can help to you.

I have a camera like that, and I also went through that problem when I wanted to erase the whole XD picture memory card ! You have to go to SET UP function y click FORMAT, then when the camera asks you for the approval of your command you have to click the virtual OK "key" located to the left side of the screen ! If you just press the physical "square button" when you order to FORMAT it won´t do it !