32 inch samsung red light stays flashing tv does not come on

It has gone into safe mode as an internal fault has been detected you need to take the back off to repair or replace board's up to and including the screen

If your getting same result on both ends of cable then your not inserting the cable correctly. It only goes in one way and make sure when you push it in be firm and it will click into place or feel like it does. Give it a slight pull if it doesn't come out of back of tv then your good. Also after you plug into back of tv look for a red light on the other end of cable. If you see a red light on other end while tv is on then you got it connected properly into back of tv.

Good Luck!

I’m happy to help further over the phone at https://www.6ya.com/expert/brandon_60dfebff379d64bd

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-style-parent:""; line-height:115%; font-:11.0pt;"Calibri","sans-serif"; mso-bidi-"Times New Roman";} Suddenlink Cable Remote Support

i have a 50 inch wega that i just replaced the lamp. it wont stay on. i lose the pictuer and sound after a min or so then lose it for a min then it comes back on???

The power supply board has been defected. Replace it with a new one.

check the relay drive transistor
you need a qualified tv repair personal to check tv

Mine stayed in stanby mode and all I had to do was to switch the plug to a different outlet. The power strip it was on wasn't providing enough power. It worked fine for a month before I had a problem.

its not hard to replace the bulb and you can go to any tv shop and have them order it.youll need to give them the make and model number off the back of the tv so they know what to order

wont turn on red light just flashes?
On my samsung flat screen tv when you are watching the televison there is no red light on the power button but when you turn the television off the red light stays on all the time? what can I do to turn this light off?

i had this with my samsung and my mums instead of pressing red power button press either switch from analog tv to digital button or just press a number