I am having difficulty getting the PagePro 1350W to print. The system says it is looking for the following file, MIMFN5_Q.DLL. Unfortunately, I cannot find the original install disc and the file is not on the Utilities and Documentation disc. Can I download the file? If so, where do I go to get the file. Thanks, Gary

SOURCE: pagepro 1350w install/print problem, vista document stuck in queue,error

Go to control panel, printers, right click the pagepro and select properties. Click the ports tab and make sure that the port is set to a USB port. This did it for me.

SOURCE: konica minolta 1350w status display comes on at start up

Open c:\windows\system32
find a file called MSTMON_Q.EXE

right click and rename the file to anything with a file extension .exe, I named it MSTMON.EXE

Create a shortcut to this new file in case you need it in the future and put the shortcut on your desktop

also, write the original name of the file down or put it on notepad, in case you want to change it back.

restart windows

SOURCE: PagePro 1350W won't pick up paper

Clean the rubber roller that draws the paper in with isoproply alcohol, in future, blow dust off top sheet in paper stack before printing.

Konica Minolta Error Codes and Solutions

• 210 Answers
• Posted on Aug 23, 2009

SOURCE: pagepro 1350W will not print.

You have to see how the led is blinking and to compare with the table that explains every blink what means. If you don't have this table, contact me and I'll send it to you.

Chip reset device for Konica Minolta Bizhub and CF imaging units
http://www.chipreset.eu

Konica Minolta Error Codes and Solutions

• 210 Answers
• Posted on Aug 23, 2009

SOURCE: My pagepro 1350 keeps blinking ERROR. I have

You have to see how the led is blinking and to compare with the table that explains every blink what means. If you don't have this table, contact me and I'll send it to you.

Chip reset device for Konica Minolta Bizhub and CF imaging units
http://www.chipreset.eu