Accessorize test: Please plug FW

The error code ##334 represents a EEPROM check error. The manual says this means the Printed Circuit Board may need replacing, however, try this procedure.
Insert paper into machine.
1)To enter service mode press Menu, copy, #
2) Select Test Mode with the + or - keys
3) Press OK
4) Press 8, lcd shows 'Please Wait', after wait, press 3, the lcd then alternates between 3-0 (EEPROM clear), and 3-1 (Purge flag)
5) When EEPROM clear (3-0) shows in lcd, press 0, then OK, then Stop then press the OFF button.

Repeat the above from Step1 to step3
in step 4 this time reset the Purge flag by pressing 0 when 3-1 shows in the lcd, OK, Stop, Off.
If the red fault light is still blinking press Resume.

hope this helps

Hi,

This model can fix with your laptop model.
http://cgi.ebay.com/13-3-WXGA-GLOSSY-LED-LCD-B133EW06V-0-HW-1A-FW-1-/260776278475?pt=LH_DefaultDomain_0&hash=item3cb77a39cb

http://cgi.ebay.com/13-3-WXGA-GLOSSY-LED-LCD-B133EW06V-0-HW-1A-FW-1-/260776278475?pt=LH_DefaultDomain_0&hash=item3cb77a39cb

Here is Samsung F480 Secret Codes

Admin Settings: *#6984125*#
Admin Settings
Internals (sub menu): *#9072641*#
Developer Settings: *#0523#
Camera test mode:
Press *#36287# key string in the dial screen to enter camera test mode -
[1] Auto focus [On]
[2] ISP firmware write
[3] ISP firmware version check

[1] Press the "1" key to disable auto focus. In order to enable auto focus, press the "1" key again.

[2] Press the "2" key to write the ISP (Camera Module) firmware. "ISP firmware write [Please wait]" will be displayed during 2 minutes. Then "ISP firmware write [SUCCESS]" will be displayed when the firmware upload finished.

[3] Press the "3" key to display ISP firmware version.
Latest ISP firmware should be 0x1f4d8723 (found in F480XXHF7)

IMEI : *#06#

Software version : *#1234#

FTA S/w version : *#1111#

Hardware info : *#2222#

F/W and H/W version : *#0206*8376263#

Test menu : *#0*#

battery info : *#0228#

Master Reset : *2767*3855#

GPRS info : *#4777*8665#

Bluetooth ID : *#232337#

LCD Brightness : *#8999*523#

Call List : *#2255#

External Displayl : *#8999*3825523#

Java Status Code : #*536961#

This code has something to do with phone locking. : *#7465625#

try installing realtek sound driver it must work.

Here is the sound drivers and a manual.
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=1672&DwnldID=7525&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+915+Express+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D915GAG&lang=eng


http://downloadmirror.intel.com/15197/eng/D915GAV_D915GAG_D915GEV_D915GUX_ProductGuide02_English.pdf

GOOD LUCK!!!

Normally pressing the MENU button brings it out of any of the modes listed

Hi,

Connect your ipod to itunes & then Restore from backup.

It will work fine.

Thanks.
Happy to help you.

What you need to do is hold down the central and menu button together, the screen will go black and then let them go and your ipod shoud be working again. Hope this helps.

try to reset it

Have you tried resetting it? Press and hold the setting and menu buttons at the same time for about 6 seconds.