How to I access the timer switch on a GE electric

Hey Linda, thank you for the question. If you are talking about the timer of your GE dryer, if it is stop working completely you may need to replace it with the right part number. For me to locate the compatible timer of your dryer I need model number of your dryer.
You can not repair the timer of your dryer but you can clean the carbon or any dust particles come in between the knob and timer switch causing the timer to behave abnormally. You can get access by removing the top cover using a putty knife. Clean or clear the terminals where the harness connect to the switch. I hope this will clear the issue. Thanks again for the great question.

i feel it is loose connection issue,

This actually a Jasco 15163 and according to www.harwareandtools.com it takes a Jasco 15602 tripper set. This tripper set can be found for online order at http://www.jascoproducts.com/products/pc/Replacement-Timer-Tripper-2-pack-p1089.htm#.U9Ov2bHG-f4

The model number you submitted is not valid. Long dry times and dryer not shutting off is either an element problem, an air flow problem. Lets begin with a good model number so we can see your unit as you do...
Waiting to hear from you,Eric and Ann Campion
P.S. Please keep in mind we help pay our staff with earnings from parts sales. Help us keep this valuable service free and order your parts from us. Visit our website for additional help at http://www.affordableappliance.com or for Parts Order Only, Call 1-570-622-6441

you should be able to replace the knob from the front of the panel without removing the control panelit has a "D" shaft on the knob and shaft also has a "D" configuration too? right?

it may be the timer that has an internal contact stock closed powering the motor circuitry.

Hi,
Here is the best way I have found to get replacement parts.

You can find parts for your unit by doing a search for “appliance parts”.
Once you get the results of the search, pick a site and when it comes up it will usually ask for the model number of your unit.
Enter your model number and you will then get a page with exploded views and a parts menu.
Find the part you need and then order it.
Check a few different sites to be sure that you are getting the best pricing.
Most sites can have the part to you in a couple of days.


I hope that this will help you to solve your problem!

Thanks for using Fixya!!

Heatman101

Sounds like you have a faulty timer switch, check with your local supply house and get the same type of switch.
When you go to replace the timer switch, unplug the dryer, then remove one wire at a time. This will prevent wiring mix-ups.
Good luck,
I hope this helps

I have a GE (Model #: DCL333EAOWW) Dryer that will not heat up properly and the timer does not work

That Sounds More Like A Serial Number. Can you Maybe Locate A Part Number On The Switch?
Also Why Did You Determine Its The Switch?