Cant turn off alarm on RCA alarm clock model 3715A

I have a I live itp152b and cant figure out how to turn the alarm off

Here's how I found it. Web search "rca rc05 manual".

http://www.payphone.com/shop/instructions/RCA-RC05.pdf

With the power off, push the alarm 1 button, then push the clock set button. Use the skip & preset buttons to set the hour. Push the clock set button again to change to the minute. Again use the skip & preset buttons to set the minute. Push the clock set button again to set. You will see an alarm clock in the upper left of the screen to show the alarm in now set. To cancel push the alarm button and then the stop/alarm off button.

Try reading the instructions, link to manual below.

http://portablemedia.manualsonline.com/manuals/mfg/rca/rca_dual_alarm_clock_rp3720.html

Look at the display. Look for a number 1 or a number 2 to determine which alarm is on. If you see a number 1, push the 1 button on the top right side of the alarm clock until the number light goes off (1 or 2 times, depending on whether it is set to beep or radio alarm). When the number is not lit up, the alarm is off.

Instructions are here: the closest available RCA CD-CLOCK RADIO USER MANUAL online is for Model #RP5610 at this location: http://www.voxxsupport.com/images/manuals/RP5610/media/RP5610_DOC_OM.PDF

If unable to link to that webpage, go to RCA Tech Support page at: http://support.rcaaudiovideo.com/manual.aspx?product=143 and click on download manual.

Following are the instructions for the RP5610 which looks very similar to the 4801A (that I also have). The only difference in the instructions is that the 4801A doesn't have a clock icon, just press the SET button until the center colon dots are flashing, Press the rewind or fast forward arrows on the circle next to it to set the time. Set the alarms by pressing the set button until bell 1 or 2 is displayed. Nap is also set with the set button - not sure how to stop it yet.

To set the clock:

1. Press the SET button until the clock icon is displayed (circle with hands at 10 and 2)
2. Press |<< REV or >>| FWD to set the time.
3. AM or PM icon will show besides the time.
   
   

If its anything like the RCA model I have, you have to simultaneously hit the alarm button for the alarm you want to turn off AND the off button, so both at the same time.

Well, I have an RCA clock radio/CD player and just figured it out. Press the "Time" button and hold it down while pressing the CD "Forward" button. Hope it works for you! Ron

The manual can be downloaded from the RCA site:
http://support.rcaaudiovideo.com/manual.aspx?product=217