Bizhub 350 needs reset daily to print..

Sir/Mam,

Did you give the machine a static IP address or DHCP meaning let the network decide what IP address is issued this machine LOVE static YOU telling it via admin setting on the copier, admin, admin 1, network, basic . set ip, mask etc.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

does the copier have a static IP address or is dhcp meaning ever time the network is turned on the copier get a new/different ip address. Copiers love static so recommend your it person assign one.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

two red light up doun, & do not printing...

After you connect printer in network just set up DHCP in your printer and from windows 7 (Devices and Printers, Add new networked printer) and job is done because windows 7 will recognize printer and install appropriate drivers.
If you have problem with that uou can set up Static IP Adress in printer and search by that IP, also you can download drivers and software for that printer from this link:

http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=867

Utility / Administrator settings (pass:12345678) / Network settings / TCP/IP settings. Select auto IP, or enter it manually. You can check IP address by printing Configuration Page: Utility / User Settings / Printer setting / Print Report / Configuration Page. Press start.
Good luck!

if you are using for the first time as a network printer then you should first know how to assign the "IP ADDRESS" to machine/printer. to check the ip address of the printer, simply go to " Administrator" mode, and check ip there.


all the best...........

Make sure that you set the ip to static (or manual)

Reinstall print driver to the PC using same ip address and print test print. next the same procedure go to web browser enter the ip address and choose administrator and the password 12345678. all your question will be in that area. scan, printing and network.

HH

You are getting a failure sheet. This happens when the scan doesnt go through. I think you are reffering to SMB scanning, which needs to have the following setup on both the MFP and the copier.

Host ID or NAME - IP address or hostname with DNS resolution.

Share Name - This is your SMB share name or folder share name on the remote PC

User Name - This is an account that is configured on the remote PC

Password - This is the password for the account setup on the remote PC.

Some things to keep in mind: Third party firewalls can block the bizhub from writing files.

Set share permissions to full control. (under sharing tab> permissions buttion)

Set NTFS permissions to at least write access. (if you have a "security" tab on the shared folder.

Or, you may see something like "allow network users to change my files" on the sharing tab. This basically does the same under different configuration scenario.

One last thing. If you havent changed anything since the problem started, it is probably just something like an expired password on the account that is setup for the copier.

Good Luck.

Can you print to your PC? if yes you know how to assign ip address to the copier. I suggest is to go web browser and type the ip adress of the copier. log in to adminstrator the password 12345678 click network scan you have choices which scanning you want. SMB, ftp scan to email. If choose SMB first you have create Folder to your desktop and name it SMB all upper case and right click sharing and permit everyone . Then back to copier web browser click tab scan and type all the names you want. Scan to e-mail you have to click network and enable the scan to email enter the SMTP leave the port 25 do not change assign a valid email address to copier and enter email address of the administrator user id and the last is the pasword. Note: everytime you visit this page you should enter the password. then click the scn tab and enter all your email address. enjoyprograming!!!