Broken Triton push button

Your best answer would come from Korg. Itself. Here's the link-
http://www.korg.com/us/support/contact

So you're saying with headphones you also only hear one side? I would suspect the internal amp is panned all to one side. There are also several other settings in this unit where pan can be set so you may have to check several areas. If you don't have any specific custom settings made I would try a restore to factory defaults. If that doesn't resolve it you likely have a hardware failure which is likely not repairable. I strongly suspect a panning issue though.

Hello I have this M50 61 key korg model, I had the same issue the fix is simple remove the back cover on the unit, carefully push in all the small cables reattach them well do it to all the small connectors these cables get lose and cause this issue, good luck let me know if that helped I fixed mines that way its been working excellent since. good luck..

You will have to go to Korg to get the replacement screen.

Here: http://www.guitar-parts.com/catalog/korg/korg-touch-screens-lcds

Wow ... $300... ouch...!!!

You will have to go to Korg parts to get the exact replacement... these are not generic items.

Try this: Korg Parts (Parts is Parts): 1-800-590-0014

Try this link:http://www.korgparts.com/content/estore_list.asp?category=3&catname=Korg

Only if it has a switch that changes over to 220. I beleave, if not ten you will have to get a power inverter for the power difference and plugs for the different styles that they have over in europe. I hope this helps.

I don't know what problem you have but try this site. http://www.korguksupport.co.uk/sitemap.cfm I hope the info you need is there. Also try googling the synthzone.

LAS VEGAS NV.

While this is Mac-related, the information regarding the reset button is helpful and seemingly little-known. This comes from a Korg rep, by the way:
Did you first manually eject the drive from the Mac before disconnecting it by either moving the drive into the trash or using the Eject option from the Finder menu? If you try to exit USB mode without ejecting the drive on the computer first and then disconnecting the cable, this can cause the unit to lock up. Additionally, you’ll notice there is a tiny hole below the volume controls on the side of the unit. You can use a paperclip to push in a button within this hole to manually reset the recorder however this is only recommended in extreme circumstances. Look forward to hearing from you.


-Matt