I need wiring diagram for a Broaster pressure fryer Model 1800E

It is a professional pressure fryer, get it professionally serviced. The arcing is probably an internal contactor and the grinding some type of electrical solenoid lock or the filter pump. Very dangerous and work on 3 phase power.

https://broaster.com/equipment/broaster-1800/

https://www.google.com/search?q=Broaster+1800

..

Is it made by the Broaster Company or a spin off like a Henny Penny? Is it gas or electric? If by the Broaster Company would it be a 1800 or a 1600? Give me this information and than I can tell you what the problem is. Not an expensive fix either.

replace termo couple (measures temp) or heating element

Replace the board. But first make sure the installation is correct. Then double check to see that the installation is correct.

Faisal,
I am a Broaster distributor, and have parts available. Which model do you have, and you are saying the bottom drain valve is leaking, correct?
Jon
[email protected]

Banglasoya,
We have a Kit available for this if you have not resolved the problem yet!
Jon
[email protected]

Dan,
Sorry, I am new to this site, and did not know about it until today. I am a Broaster distributor, and have the parts available. Couple questions if you have not resolved issue yet. Does your pressure guage work? If so how much does it read with about 8 pieces of chicken in a load?
Jon
[email protected]

GVE_10
That is a tough one, as 1400E has been out of production for 30 years. Parts have been discontinued for about 20 years. When you say you need to change voltage, that machine was made as 208 0r 240. 240 machine was always fine on 220 volts. 208 machine could burn out heating element over some time, but since you cannot buy other elements anyway, I would just go ahead and use the machine. If your real question is how to convert from 1-phase to 3-phase or vice versa, that is different story, and I can help you with that.
Jon
[email protected]

Hi there.

Try visiting this web for manuals.

http://www.broaster.com/fdsvceqp.htm

Regards.

I'm looking for an owners manual for a Broaster 1400 E.
Could you tell me where I can find one?

Thank you