I damaged the Driver CD that comes with the Gigaware 6ft USB to 9-pin serial port cable and I am trying to find the replacement software. Radio Shack says they cannot help me. Do I even need the software with Windows XP? IF I do, do you know where I could dpwnload it? Thanks.

Hi,

The following link should meet the requirements assuming your existing cable is defective.

http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10311&cs_id=1031104&p_id=2276&seq=1&format=2

The Dynex adapter does not have any numbers on it. It was the one that is only about a foot in length and has a square center piece that houses the conversion electronics. Standard 9 pin RS-232 male plug on one end and the standard USB plug on the other end. I purchased it within the last month at BestBuy here in Austin TX.

free driver to usb 2.0 serial cable 9 pin
DB-9RS-232 Adapter cable

Call your local Radio Shack and they should be able to help you as the Gigawarecamera is made and sold by them.

Hope this is of some help. Bud

Who's the MFG. of this serial device? Try this link, it may help with your problem.

http://www.gilsson.com/usb_drivers_download.htm

Mike...

Try searching the following page
http://www.sabrent.com/#itemName=&itemID=0&section=Drivers

I found my disc. Problem solved. Thanks for follow-up.

Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

No need for disc, don't worry.
Radio Shack/Gigaware 26-949 USB to Serial Cable drivers (32/64bit) can be found at driverupdate us
I hope I have helped you...
Take a look, and enjoy

1:)Do you have installed driver?
2)The green light on webcam working???