Setting Alarms I am trying to deactivate the alarms on my Casio g-shock 2688. I have a couple alarms that go off all day long and I do not know how to turn them off. Main problem is one of the alarms is on snooze and it goes off every 5 mins for an hour.

PDF]Operation Guide 2608 2638 2688 - CASIO.

ftp.casio.co.jp/pub/world_manual/wat/en/qw2688.pdf...

here> http://support.casio.com/en/manual/009/qw2688.pdf is the manual.

Use the mode button to switch to the alarms. Use the Receive button to scroll through the alarms until you get the one that you want to turn off. Press the Time Memo button to toggle it on or off (you'll know it's on when the pie piece in the 3 o'clock part of the right-most circle is lit and it's off when that pie piece is unlit.) Use the same method to turn an alarm on by toggling the alarm to the other setting.

If you haven't got instructions on how to do this, you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

Copy the manual from;

http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2688.pdf

what you have to do is
1. press the mode button until you get to the setting that has "AL" at the bottom right.
2. then you press the "receive" button to switch between the four alarms.
3. as you are going through each alarm time, you need to look in the circle at the top right. When you are going through the alarm times, if there is a mark next to "ALM", you need to press the "time memo" button so that the mark next to "ALM" is no longer there.
4. repeat step fout for all of the alarms, and the problem should be fixed.

Press mode until in Alarm Mode
Press Receive until alarm # shows AL1-4 or Sig
Press Time/Memo to change alarm on or off. On is shown by indicator next to alarm name.

ive set an alarm that goes off at twelve every day.it goes off every five minutes for thirty minutes. its driving me nuts. how do i fix this?

Alarm Setting:

1st: Press the mode button to go to the alarm screen.

2nd: Press the adjust button for the time to flash

3rd: (For the Hourly Alarm) You can adjust the time here while it is flashing by pressing the start/stop button. Cycle through this until you have the time you want. The setting will have the P in the left side of the screen for PM (night time).

4th: (For the Daily Alarm) Do steps  1-3 once the time is flashing use the Mode button to cycle through to the date field of the watch. Once it is flashing you can use the Start/Stop Button to chose which date Month/Day, after chosing the month just press the Mode button once more to go to the day field.