Need instructions for setting the hot keys on the Microsoft 4000 Wireless keyboard

I found what I wanted by navigating as follows:

Control Panel -> Devices and Printers -> Wireless Comfort Keyboard -> Configure My Keyboard -> Keyboard Properties -> Key settings.

http://www.microsoft.com/hardware/documentation/default.aspx try this link for instructions and downloads. hope this is helpful. also if you can try it on another pc-see if it has a problem. i use that same set, and only when battery dies i have a problem. otherwise it is great! be well!

Instructions here

http://www.microsoft.com/hardware/documentation/default.aspx?type=Sets&sku=4GC-00002

Software here

http://www.microsoft.com/hardware/download/download.aspx?category=MK

Please!!

I don't have the instruction manual for my, Microsoft Wireless Laser Desktop 4000. I would like to download a manual that would, show me just what all of the features on the top and side are for and how to use them.

Please! Will you help me?

Bobbie

A microsoft update, or a system rollback may have changed the drivers, or unregistered the buttons from the associated profile..

If the keyboard came with drivers, or software, you will more than likely need to re-install them.

Hi danny_3339,
since you didn't tell us which operating system you are using:
http://www.microsoft.com/hardware/download/download.aspx?category=MK
Open that site and choose the appropriate settings to get your driver download...
Kind regards,
noris017

http://www.microsoft.com/hardware/documentation/default.aspx

Look under the wireless keyboard. There is a door to install batteries. It sounds as though you just need to replace the batteries on the keyboard. I think that they're AA.

Good luck!

Microsoft does not have manuals for their wireless keboards and mouse.
I will give you a few things to look at as I have the same Keyboard.
Normal 0 Go to Control Panel.
1. Click on Keyboard.
2. When the Keyboard Properties come up, CLICK on Key Settings.
3. Then set up the keys by selecting the Key to be changed.
Normal 0 Go to Control Panel and click on the Mouse icon.
Then select the Mouse button you need to program.
Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Have you tried cleaning the keyboard? Below is a link that offers instructions on how to clean the keyboard thoroughly.

http://www.helpwithpcs.com/maintenance/cleaning-keyboard.htm