I have a Zenith TV that I can not get to recognize a Magnovox DVD/VCR player. I know the dvd player works on other tvs. The cables are new. Both remotes are working, the vcr and dvd respond to the remotes. I only get TV chanels, no blank picture for auxillary. Thanks for your help.
SOURCE: Use Zenith XBV443 DVD Player / VCR Combo without remote control
if you need a remote control for your unit go to www.partstore.com and purchase a originald remote for your unit.good luck.
SOURCE: Connecting dvd player to zenith sy2551s system and doesn't work
Yes, You need to be on AUX ,you can get to that setting by pressing channel 01 then press the channels down button instead of going to channel zero it will start to cycle through your AUX's inputs on the back of the tv.Also, another way to do this is on the original remote there will be a SOURCE button or INPUT button that can also cycle your TV through the aux inputs.REMEMBER.Make sure your DVD player is turned on and hooked up or else the AUX screen will be black.Rate me when you fix it!GOOD LUCK
SOURCE: zenith xbr616
I have the exact same issue, DVD don't play. The VCR works & the cds will play on DVD side, but it will not play DVD. Warranty is expired and we barely used it.
SOURCE: Zenith Remote controller
Have a Zenith Remote 124-202-01 with MBR3440 on the inside cover of the remote. I've tried all kinds of numbers and generic numbers without any luck. Anyone know what the code is for my 1995 32" Zenith TV System 3 TV?
Zenith and LG TV support queue in Canada 18885422623 8-5 CST.
Zenith and LG TV support queue in U.S. 18779936484 24/7
Zenith 32” TV System 3 Model Number #SM2771S
Solution: Unplug the Zenith TV for approximately 5 seconds. Remove batteries in the Zenith remote. With the batteries removed press the TV button on factory remote and then the power button 5 times and hold the power button on the fifth time for approximately 10 seconds (I suspect this just clears the internal memory of the remote). Put the batteries back in the remote. Plug the TV back in and the remote should work again. My remote did work again successfully.
SOURCE: Remote code for Insignia DVD/VCR combo and Winbook 32LCD TV
I have a Onkyo HT-S70 surround sound amplifier with a remote control. I am trying to find out what the code is to operate the Insignia BlueRay DVD player from the remote control?.
56 views
Usually answered in minutes!
×