Tv wont come on just make a clicking sound when power button is pressed. green power light comes on for second and then goes off.

Hello,

My LOEWE CAL 232 will not power up. When the power button is pressed, the monitor turns on, with the LOEWE on the monitor, then the TV continues with the previous activity (antenna, DVD, VCR etc.). Now all that happens is

1. the red light comes on

2.after about 1 second the green light turns on for about 12 seconds

3. the the green light turns off for about 1 second

4. then the green light turns on again for about 12 seconds

and this continues until the power button is pressed to turn the TV off. During this time, the monitor does not turn on and the only sound I hear seems to eminate from the power button.

Any thoughts?

hi there,

Check for bad solder on convergence module. May have bad stk's. Do not neglect looking for bad solder on dsignal and defl boards. Mitsubishi is very prone to bad solder.

`jack

FAULTY POWER SUPPLY REPLACE

AVERAGE REPAIR COST £80 TO £100

My Loewe Aconda 81 HDR TV will not turn on. When I press the power button the green light comes on but the red light stays on with it and after a few seconds the green light goes out and the red light stays on. Any help please.

If you can open than open your LCD tv & checked Inverter Borad it have White & red color connector may be this board is defective.

I have the same TV and the error light code on my set is 22

Hi i have a pilips 42" plasma tv (42PF5320/79) i can hear clicking the green light is on and the tv will go into stand by if i press the power button and the red light also comes on .I have turned it on and off and it works now nothing just the light on the front as if its working looking at the back through the slots two green lights come on then the tv clicks and they turn off,thanks

hy i got a toshiba 42" LCD tv ,when i press the power boton
iget the red light,& it stay that way ontil i pressthe power back off
thanks for any help

same problem here