Hi,
I changed the coil around the fan but none of the elements or the heat light come on.
Greg
Does the fan come on?
Do the top and bottom elements come on?
If the fan comes on, but none of the other elements come on when selected, it might be that the thermostat switch needs to be reset.
By the thermostat connection at the back, there should be a switch - a small blue button, than might have popped out. Push it back in and see if it works...
It worked for me when I replaced my element, and last night when my over stopped giving heat, I had to open up the back and reset the button.
Hope it helps
I assume that you mean the circo therm element? If you do. Have you made sure that the wires that were connected are back on the same connections?
I believe, I'm doing this from memory, you should have two red/white wires they attach to one side of the element and the other wire to the other side connection.
Hope this helps
deep Diver
If its convection , take the back panel off inside the oven an change the element . Ta daaaaaaaa !
553 views
Usually answered in minutes!
Yes, that was done. You have not given me any suggestions on why it's not heating though.
Do you know what to do next?
Greg
×