Have a hotpoint wt761 washing machine which is displaying a f-08 error code

Replace the paddle check the carbon brushes

SOURCE: have a hotpoint wt761 washing

http://www.recommendedbuys.co.uk/household-appliances/washing-machines/hotpoint-wt761.htm

as you can read in these site that is a grate problem with the model allso the company tech is talking about to chage the machine insted repair so all I can say is that you have problem with the computer board of the machine,

Could well be worn motor brushes if no action from the drum>Common fault on machines over 4....5 years old...Parts cost around £18....Fitting quite simple...Good luck

Check the power outlet, the plug and the cable or with the appropriate tester see if you have mains power where the power cable connects to the machine wiring.

First, try turning off the mains power to the machine for 30 minutes and switching it back on to see if the error persists. This indicates a problem with the heater relay or heater. This usually means that the relay cannot be operated due to a heater fault and that the heater will need replacing. A service call to replace it will be the quickest option.

You have a blockage not allowing the drum to empty.
Check for blockages via the pump filter and the hoses
F05 means blocked pressure switch
If it still won't work come back to me

If it works fine with the heater off then i would say that fault appears to be element..the readings you get seem okay, put you meter onto megs and check, with wires off if you get electrical leakage between live and earth...Body....of element, it could be element is heating with no water in machine causing it to burn out..this is a problem with this machine...Wish you well

call in hotpoint

the h2o message means the machine isn't getting enough water. check pressure and water intake pipe.

Can still wash, flashing door sign, but cannot open the door, will not open, but continues to wash