Aquarius df61 fill problems. My dishwasher does not fill with water on either the wash or the rince cycle. How can this be fixed

1s it fills with water to rince off any food or anything else on te dishes then it refills , with the wash cycle then the soap door opens , then it drains once moreand refills to rince thendrains again

Hi


White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle.
Daniel

The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

check in let valves

i have cleaned the filter on my hotpoint aquarius DF61 on cant put it back together.

be sure rinse aid dispenser is full ..also ck water level after fill should be almost to bottom of float

Just pour a bag of dishwasher salt in water will come out.Then light goes out.

Can you hear/see any washing sound/spray, it sounds to me like the wash pump could be faulty.

I have not heard of or seen this dishwasher but I do know on a lot of dishwashers if the water is not hot enough it will heat the water and the heating light will come on to let you know. On most models if the washer has to heat the water it will prolong the wash time. It may do this through out the wash and rince cycles. dont be surprized if your dishwasher runs 90 min or longer. This is normal for most all dishwashers now. I would read the owners guide and get to know whats normal for your unit.